- ctan-ann - ctan.org

CTAN upload notification: pdfTeX 1.11a
by Reinhard Zierke 05 Aug '03

05 Aug '03

----- Forwarded message from ctan-upload ----- Name of contribution: pdfTeX 1.11a Name and email: Martin Schröder <martin(a)pdftex.org> Suggested location on CTAN: systems/pdftex Summary description: A new stable version of pdfTeX License type: gpl Announcement text: ---------------------------------------------------------------------- Major changes since 1.10b ------------------------- - New command pdftrailer analogue to pdfcatalog whose argument ends up in the trailer dictionary. - The behaviour when an included pdf has a newer version than the one specified with pdfoptionpdfminorversion can be controlled by the new internal INT pdfoptionpdfinclusionerrorlevel: If it's 0, pdfTeX gives only a warning; if it's 1, it raises an error. This can also be set in pdftex.cfg with pdf_inclusion_errorlevel - The syntax for outlines has been extended to allow attributes: <outline spec> --> <attr spec> <action spec> [count <number>] <general text> See http://www.ntg.nl/pipermail/ntg-pdftex/2003-June/000165.html - The syntax of pdfobj has been extended: pdfobj <object type spec> (h, v, m) <object type spec> --> reserveobjnum | [useobjnum <number>] [<attr spec>] [stream [<attr spec>]] <object contents> <object contents> --> <file spec> | <general text> When the optional keyword `reserveobjnum' and `useobjnum' is not given, the behaviour is unchanged. See also http://tug.org/mailman/htdig/pdftex/2003-March/003814.html - Bugfix: /CreationDate didn't care for the timezone and could be fooled. See http://www.ntg.nl/pipermail/ntg-pdftex/2003-July/000223.html - Bugfix: The translation of 8-bit characters in included pdfs that had their eighth bit set sometimes got wrong because of a missing typecast. See http://www.ntg.nl/pipermail/ntg-pdftex/2003-July/000216.html - Bugfix: pdfTeX -ini would crash with a minimal file because it didn't read it's config and so didn't know anything about fonts. See http://tug.org/pipermail/pdftex/2003-July/004262.html - Bugfix: pdfstartlink would produce spurious /NewWindow entries. Also the syntax of <action spec> and <goto-action spec> has been cleaned up. See http://www.ntg.nl/pipermail/ntg-pdftex/2003-June/000167.html - Bugfix: pdffontattr was not used for T3 fonts. See http://tug.org/pipermail/pdftex/2003-June/004127.html - Bugfix: The cropbox of an included pdf would sometimes not be used. See http://tug.org/pipermail/pdftex/2003-May/004037.html - pdfTeX uses xpdf 2.02 %EOF the archive contains NEWS, README and pdftex.xml, which should be extracted and put alongside the archive. And pdftex.xml should go into the catalogue. :-) ---------------------------------------------------------------------- Thanks for the upload. I installed it as suggested in CTAN:systems/pdftex Graham, can you please use systems/pdftex/pdftex.xml for the catalogue? Reinhard Zierke for the CTAN team

1 0

CTAN submission -- bardiag
by Reinhard Zierke 05 Aug '03

05 Aug '03

----- Forwarded message from R. Stepanyan ----- Please find below some information about BarDiag package, which I have recently uploaded to Your archive (ftp.dante.de). Name of the BarDiag v.0.4 contribution My name R. Stepanyan My email rstepanyan(a)yahoo.com Summary description package for drawing bar diagrams Suggested CTAN directory /graphics Short text for announcement: The main purpose of the package is to make the drawing of bar diagrams possible and easy in LaTeX. The BarDiag package is inspired and based on PSTricks. License lppl ----- End of rwarded message from R. Stepanyan ----- Thaks for the upload. I installed the package in CTAn:graphics/bardiag after a bit of cleaning up (removing .log and Emacs backup files, and renaming readme.txt to README to allow web browsers to show this file). Reinhard Zierke for the CTAN team

1 0

CTAN upload notification: beamer
by Reinhard Zierke 04 Aug '03

04 Aug '03

----- Forwarded message from ctan-upload(a)nova.dante.de ----- Name of contribution: beamer Name and email: Till Tantau <tantau(a)cs.tu-berlin.de> Suggested location on CTAN: macros/latex/contrib/beamer Summary description: A LaTeX class for producing beamer presentation and slides License type: LaTeX Project Announcement text: ---------------------------------------------------------------------- The beamer class is a new LaTeX class for producing slides. It s functionality is similar to Prosper, but does not need any external programs and can directly produce a presentation using pdflatex. ---------------------------------------------------------------------- ----- End forwarded message ----- Thanks for the upload. I installed it as suggested in CTAN:macros/latex/contrib/beamer Reinhard Zierke for the CTAN team

1 0

CTAN upload notification: png2pdf 1.0.1
by Reinhard Zierke 04 Aug '03

04 Aug '03

----- Forwarded message from ctan-upload ----- A submission was uploaded to nova.dante.de:/ftp/incoming/upload-20030804.001/. The following information was provided by our fellow contributor: Name of contribution: png2pdf 1.0.1 Name and email: Dirk Krause <krause.dirk(a)web.de> Suggested location on CTAN: /support/png2pdf Summary description: PNG to PDF converter License type: gpl Announcement text: ---------------------------------------------------------------------- The png2pdf program converts PNG images to PDF. An alpha channel in the PNG file can be used to mix against a specified background color and/or to create a PDF image mask or PDF alpha channel. The program may be of interest for pdfLaTeX users creating posters, flyers having colored background. ---------------------------------------------------------------------- ----- End forwarded message ----- Thanks for the upload. I installed the new version as suggested in CTAN:support/png2pdf/. Additionally, I extracted the README file from the archive and put it in this directory too. Reinhard Zierke for the CTAN team

1 0

tug.ctan.org to be offline for a few days
by Jim Hefferon 02 Aug '03

02 Aug '03

Because of a security situation, the ftp://tug.ctan.org archive and the http://www.ctan.org front end to that archive will be going down until at least Wed Aug 06 (US East Coast). The archives at http://www.tex.ac.uk and http://dante.ctan.org remain up. I apologize for the inconvience that this causes. Jim Hefferon ftpmaint(a)ug.ctan.org

1 0

Re: CTAN upload notification: refstyle v0.2
by Robin Fairbairns 01 Aug '03

01 Aug '03

quoth the upload daemon at cam.ctan.org: > A submission was uploaded to /anfs/ctan-inc/upload-20030731.002/. > > The following information was provided by our fellow contributor: > > Name of contribution: refstyle v0.2 > Name and email: Danie Els <...> > Suggested location on CTAN: macros/latex/contrib/refstyle > Summary description: Advanced formatting of cross references > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > The refstyle provides a consistent way of producing references > throughout a project. Enough flexibility is provided to make local > changes to a single reference. The user can configure his or own > setup. > > It has a direct interface to VARIOREF and namedref's from the > NAMEDREF package can easily be incorporated (if needed). For large > projects such as a series of books or a multi volume thesis, written > as freestanding documents, a facility is provided to interface to > the XR package for external document references. > > The REFSTYLE package is BABEL compliant in that all language > definitions are added to the extras<langauge> token list, enabling > local and global language changes through the BABEL language > changing commands. Afrikaans, Danish, English, German and Swedish > definitions are provided --- any other contributions will be > appreciated (PLEASE HELP!). > > ---------------------------------------------------------------------- thanks for the upload: i've installed the files as requested. users should note that the distribution is in a mini-texmf tree under macros/latex/contrib/refstyle Robin Fairbairns For the CTAN team

1 0

new version (3.8) of uk tex faq on ctan and the web
by Robin Fairbairns 31 Jul '03

31 Jul '03

i've just pushed a snapshot of the current state of the faq onto ctan (help/uk-tex-faq) and the web (http://www.tex.ac.uk/faq). apart from installation and usage instructions for those hardy souls who would like to install the new latin modern fonts, there aren't many substantial changes -- a few new questions synthesised and answered, a few corrections and extensions of existing answers. the static html copy of the faq is now a regular fixture of the ctan distribution (help/uk-tex-faq/FAQ-html.tar.gz), and i have therefore removed the startlingly awful perl scripts that are used to produce html. errors detected, comments, suggestions, to faq(a)tex.ac.uk, please Robin Fairbairns UK TeX FAQ maintainer

1 0

Re: CTAN upload notification: PerlTeX
by Robin Fairbairns 31 Jul '03

31 Jul '03

quoth our upload daemon: > A submission was uploaded to upload-20030731.001/. > > The following information was provided by our fellow contributor: > > Name of contribution: PerlTeX > Name and email: Scott Pakin <...> > Suggested location on CTAN: macros/latex/contrib/supported/perltex > Summary description: Define LaTeX macros in terms of Perl code > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > PerlTeX is a combination Perl script (perltex) and > LaTeX2e style file (perlmacros) that, together, give > the user the ability to define LaTeX macros in terms of > Perl code. Once defined, a Perl macro becomes > indistinguishable from any other LaTeX macro. PerlTeX > thereby combines LaTeX's typesetting power with Perl's > programmability. > ---------------------------------------------------------------------- i've installed the files in macros/latex/contrib/perltex, there being no contrib/supported any more. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: CTAN upload notification: threeparttable
by Robin Fairbairns 30 Jul '03

30 Jul '03

quoth the upload daemon: > A submission was uploaded to /anfs/ctan-inc/upload-20030729.001/. > > The following information was provided by our fellow contributor: > > Name of contribution: threeparttable > Name and email: Donald Arseneau > Suggested location on CTAN: macros/latex/contrib/misc > Summary description: Three part tables: title (caption), tabular, > notes, all with the same width > License type: Generic DFSG > > Announcement text: > ---------------------------------------------------------------------- > Updated threeparttable package (v. 3.0 Dated June 13 2003) > > This package facilitates tables with titles (captions) and notes. > The title and notes are given a width equal to the body of the > table. > > New with version 3.0 > > - Some bug fixes > - tabularx support. > - package options for a few different table-notes formats > - simple measuredfigure environment operates similarly. > > ---------------------------------------------------------------------- i've installed the file to replace the old version. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: upload (new version of) mimetex.zip to ftp.dante.de
by Rainer Schöpf 29 Jul '03

29 Jul '03

On Tue, 29 Jul 2003, John Forkosh wrote: > As per your README.uploads instructions... > + what you've uploaded > mimetex.zip > (version 1.10, to replace support/mimetex/mimetex.zip) > + which CTAN node you've uploaded to > ftp.dante.de > + where you want the files to go > support/mimetex > Please REPLACE all existing files (mimetex.zip and README) in > support/mimetex (and please unzip mimetex.zip README and then > place this separate copy of README alongside mimetex.zip in the > support/mimetex directory) > + what licensing conditions you apply to your software > GNU GPL > + brief summary of what your upload is intended to do. > (a) Completely replaced mimeTeX's original built-in fonts > with thinner and more pleasing fonts, and added one > larger font size. > (b) Also: several new and tested, but as yet unused, functions > to eventually support super-sampling anti-aliasing > (with or without rotated grid), and general code modifications > to eventually support this improved anti-aliasing. > ---------------------------------------------------- > From the original submission... > MimeTeX parses LaTeX math expressions, and emits either mime > xbitmaps or gif images of them, rather than the usual TeX dvi's. > Therefore, mimeTeX's images can be imported directly into html > documents with the <tag>, e.g., > <img src=../cgi-bin/mimetex.cgi?f(x)=int_{-infty}^x~e^{-t^2}dt > border=0 align=absmiddle> > without intermediate dvi-to-gif conversion, and without storing > lots of little gif files, one file for each converted expression. > This makes your html documents more readable and easily maintained. > See > http://www.forkosh.com/mimetex.html#examples > for examples demonstrating mimeTeX's features and usage. > MimeTeX is primarily intended to help maintain native html > documents containing math, not primarily for latex2html-like tasks > where you're maintaining native LaTeX documents that are later > redistributed in several formats, including html. In this sense > it's a kind of lightweight alternative to MathML, with the > advantage that mimeTeX preserves LaTeX syntax. > Similar non-MathML packages, like textogif and gladTeX, > require setup procedures that use TeX to help generate external > gif images of your equations, which are later included > in your html document as it's being rendered. MimeTeX, as far > as I know, is the only such non-MathML package that has its > own built-in parser and rendering engine, entirely independent > of TeX, and therefore requires no setup procedure or external > images whatsoever. It renders realtime, on-the-fly images > directly from LaTeX math expressions embedded in html documents. Thanks for the update. I replaced mimetex.zip and README in the support/mimetex directory. For the CTAN Team Rainer Schöpf

1 0

Re: CTAN submission -- babelbib package
by Rainer Schöpf 29 Jul '03

29 Jul '03

On Tue, 29 Jul 2003, Harald Harders wrote: > what: babelbib.tar.gz, README.babelbib > node: ftp.dante.de > location: CTAN:/biblio/bibtex/contrib/babelbib > license: lppl > Please replace all files in that directory. In addition, please replace > the README included in the tar archive by the seperately uploaded file > README.babelbib (renamed to README). An xml file is included for the > catalogue. > > > From the README: > > This package enables to generate multilingual bibliographies in > cooperation with babel. Two approaches are possible: Each citation > may be written in another language, or the whole bibliography can > be typeset in a language chosen by the user. The current version > supports Afrikaans, Danish, Dutch, English, French, German, Italian, > Portoguese, Spanish, and Swedish. > In addition, the package supports commands to change the typography > of the bibliographies. > Supported bibliography styles are bababbrv.bst, babalpha.bst, > babplain.bst, babunsrt.bst, bababbr3.bst, babplai3.bst, and babamspl.bst. > > Changes to the last version: > > Now, the style file changes the case of titles if necessary (as in > English, while not in other languages). Thus, no change in bib files > needed anymore. > > New languages: Afrikaans, Danish, French, Portoguese, Spanish, and Swedish Thanks for the update, I installed it. For the CTAN Team Rainer Schöpf

1 0

Re: CTAN submission -- isodate
by Rainer Schöpf 29 Jul '03

29 Jul '03

On Tue, 29 Jul 2003, Harald Harders wrote: > I have uploaded isodate.tar.gz to ftp.dante.de. It contains the new > version of the isodate package, please replace the files in > CTAN:/macros/latex/contrib(/supported)/isodate. License stays LPPL. > There is an xml file in the distribution for the catalogue. > > From the README: > > Tune the output format of dates. > > This package provides six commands to switch the output format of the > commands oday, printdate, printdateTeX, and daterange > (partly language dependent): > isodate switches to yyyy-mm-dd; > umdate switches to dd.,mm.~yyyy, dd/mm/yyyy, or mm/dd/yyyy; > shortdate switches to dd.,mm.,yy, dd/mm/yy, or mm/dd/yy; > TeXdate switches to yyyy/mm/dd; > origdate switches to the original LaTeX format; and > shortorigdate switches to a short format, e.g. dd mmm yy. > > This version adds Swedish to the list of known languages (thanks to > Christian Schlauer). Thanks for the update, I replaced the old versin by the new one, in macros/latex/contrib/isodate For the CTAN Team Rainer Schöpf

1 0

Re: ps2eps 1.47 in /incoming
by Rainer Schöpf 28 Jul '03

28 Jul '03

On Fri, 25 Jul 2003, Roland Bless wrote: > - I just uploaded an updated version of the ps2eps tool > to ftp.dante.de. It's all in the subdir /incoming/ps2eps. > > - You can replace the existing version in support/ps2eps > > - The program is licensed under gpl. Thanks for the update, it's all in support/ps2eps For the CTAN Team Rainer Schöpf

1 0

Soliciting For Business Venture and Partnership.
by davis wembe 26 Jul '03

26 Jul '03

From: MR. DAVIS WEMBE Telephone: 0031-641115862 Email: daviswembe(a)starmedia.com Attn: Soliciting For Business Venture and Partnership. My name is MR. DAVIS WEMBE Chairman of contract award and monitoring committee of Ministry of Urban and rural development ,my duty as empowered by the Mauritius Government is to provide the basic amenities,social recreational activities in urban and rural areas,This programm includes assistance to deprived Local communities and to co-ordinate projects and development at the national level, Furthermore, from this projects we have been able to secure some reasonable amount of U.S.$21.8m(Twenty one Million Eight Hundred Thousand U.S.Dollars Only)as commision from various Contractors resulting from over invoicing ,hence all the necessary approvals has been completed. These approved fund is now packaged and despatched through a security company for onward delivery to its final destination. These fund are first deposited into a vault security before we arrange for its movement to Europe through diplomatic channel using decoy purporting that the fund belongs to an expatriate/company , as we are Government officiale ,we are not allowed to operate/own foreign bank account,Hence we need you to stand as the beneficiary and claim the fund on our behalf from the security company. Presently I am now in Europe to search for a reliable person/company of high intergrity /dignity and one with conscience who will claim this fund on our behalf as the beneficiary,and we have agreed to give you 25% of the total sum as commission for your assistance/effort. And 5% will be used to settle every expenses incurred. We will use 70% to invest under your recommendations and guide and to go into Joint venture business with you. I would greatly appreciate your assistance .Also you call me on my telephone number for more briefing 0031-641115862 as I look forward to your response as soon as possible. Best regards, MR. DAVIS WEMBE _________________________________________________________ http://www.latinmail.com. Gratuito, latino y en espa�ol.

1 0

Re: CTAN upload notification: footbib
by Robin Fairbairns 26 Jul '03

26 Jul '03

this 'ere upload daemon saith: > A submission was uploaded to /anfs/ctan-inc/upload-20030726.001/. > > The following information was provided by our fellow contributor: > > Name of contribution: footbib > Name and email: Eric Domenjoud > Suggested location on CTAN: macros/latex/contrib/supported/footbib/ > Summary description: make bibliographic references appear as footnotes > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > version 2.0.3 of the footbib package > > ---------------------------------------------------------------------- i've installed the files as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Touched-up package lazylist on ctan
by Robin Fairbairns 26 Jul '03

26 Jul '03

i've just installed lazylist on ctan, in macros/latex/contrib/lazylist this package, formerly known as lambda (by Alan Jeffrey), has been renamed, with the author's agreement, to avoid conflict with the upstart omega lambda (which is believed to have a greater momentum). the package does lists in tex's mouth, and provides a bunch of lambda-calculus and list handling macros. the licence is lppl (again changed with alan's permission). Robin Fairbairns For the CTAN team

1 0

Re: CTAN upload notification: pst-circ
by Rainer Schöpf 24 Jul '03

24 Jul '03

Christophe Jorssen and Herbert Voß submitted an update to pst-circ: > Announcement text: > ---------------------------------------------------------------------- > update: > - added dipolestyle triac and use rectangle option > also for the transformer; > - added quadrupol optoCoupler; > - added transistor option circle Thanks for the update, I installed it in graphics/pstricks/contrib/pst-circ For the CTAN Team Rainer Schöpf

1 0

Re: CTAN submission --- memoir class update
by Robin Fairbairns 24 Jul '03

24 Jul '03

Peter Wilson writes: > I have uploaded memupdate2.tar.gz to UK incoming. Please use > this to replace some of the files in macros/latex/contrib/memoir. > > The distribution is under the LPPL. > > From the README > Memoir is a flexible class for typesetting general fiction, > non-fiction and mathematical works as books, reports, articles or > manuscripts. Documents can use 9, 10, 11, 12, 14 or 17pt as the > normal font size. Many methods are provided to let you create your > particular design. > > Changes (2003/07/23) > o New version 1.7 of mempatch.sty (improved odd/even page checking, > spacing in the bibliography, minor tweaks with the article option, > and bug fixes) > o New version of the Addendum (memmanadd.pdf) > o Apart from these files (and the README) no changes to any other > documents i have installed the files as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: [CTAN submission] Prosper Preview class
by Rainer Schöpf 23 Jul '03

23 Jul '03

On Wed, 23 Jul 2003, Mathieu Goutelle wrote: > Dear CTAN maintainers, > > Here are the informations about the upload of a new document class: > > > + what you've uploaded > > /incoming/ppr-prv.tgz > > > + which CTAN node you've uploaded to > > dante.ctan.org > > > + where you want the files to go > > macros/latex/contrib/supported/ppr-prv > > > + what licensing conditions you apply to your software (see list > > below). > > LPPL (LaTeX Project Public License) > > > + a brief summary of what your upload is intended to do. > > (please note that the mail should be in english for speedy processing) > > This class is to be used with LaTeX presentations using the prosper > class. ppr-prv stands for Prosper Preview. The aim of this class is > to produce a printable version of the slides written with Prosper, with > two slides per page. Further informations can be found in the > 'ppr-prv.txt' file. Thanks for your upload, I installed it in macros/latex/contrib/ppr-prv (The supported subdirectory does no longer exist.) For the CTAN Team Rainer Schöpf

1 0

CTAN submission -- polytable
by Reinhard Zierke 22 Jul '03

22 Jul '03

----- Forwarded message from ctan-upload ----- The following information was provided by our fellow contributor: Name of contribution: polytable Name and email: Andres Loeh <polytable(a)andres-loeh.de> Suggested location on CTAN: macros/latex/contrib/polytable Summary description: tabular-like environments with named columns License type: LaTeX Project Announcement text: ---------------------------------------------------------------------- This package implements a variant of tabular-like environments where columns can be given a name and entries can flexibly be placed between arbitrary columns. Complex alignment-based layouts, for example for program code, are possible. ---------------------------------------------------------------------- XML file: ********************************************************************** <?xml version=1.0?> <!DOCTYPE entry SYSTEM ../catalogue.dtd> <entry id=polytable datestamp=2003/07/22 modifier=ftpmaint(a)dante.ctan.org> <about> <name>polytable</name> <caption>tabular-like environments with named columns</caption> <author> <name>Andres Loeh</name> <email>polytable(a)andres-loeh.de</email> </author> <license type=LaTeX Project /> </about> <description> <abstract> This package implements a variant of tabular-like environments where columns can be given a name and entries can flexibly be placed between arbitrary columns. Complex alignment-based layouts, for example for program code, are possible. </abstract> </description> <distribution> <ctan>macros/latex/contrib/polytable</ctan> </distribution> </entry> ********************************************************************** Thanks for the upload. I installed you package as suggested in CTAN:macros/latex/contrib/polytable Reinhard Zierke for the CTAN team

1 0

CTAN submission -- LaTeXPiX
by Reinhard Zierke 22 Jul '03

22 Jul '03

> A submission was uploaded to nova.dante.de > > The following information was provided by our fellow contributor: > > Name of contribution: LaTeXPiX > Name and email: Nick van Beurden <beurden(a)email.com> > Suggested location on CTAN: as is > Summary description: LaTeXPiX is a LaTeX figure editor for Windows. > License type: Public Domain > > Announcement text: > ---------------------------------------------------------------------- > LaTeXPiX already exists within the CTAN archive. Could you please update the distribution with the supplied new version. Maybe you could announce it, for it removes some bugs compared with the previous release. Thanks a lot for your help. > ---------------------------------------------------------------------- Thanks for the upload. I installed the new version as suggested replacing the old one in CTAN:systems/win32/latexpix/ Reinhard Zierke for the CTAN team

1 0

Re: CTAN upload notification: betababel
by Rainer Schöpf 21 Jul '03

21 Jul '03

A new package was uploaded to CTAN: > Name of contribution: betababel > Name and email: Felix Berkemeier > Suggested location on CTAN: /macros/latex/contrib/ > Summary description: Betababel is a macro that allows to insert ancient greek text coded in Beta Code into your document. > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > The betababel package provides a simple way to insert ancient greek > texts with diacritical characters into your document through the > commonly used Beta Code transliteration. You can directly insert Beta > Code texts - as they can be found at the Perseus project, for example - > without modification. > ---------------------------------------------------------------------- Thanks for your submission. I installed the package in macros/latex/contrib/betababel For the CTAN Team Rainer Schöpf

1 0

Re: lm085.zip on dante:/incoming
by Rainer Schöpf 21 Jul '03

21 Jul '03

On Thu, 17 Jul 2003, Staszek Wawrykiewicz wrote: > I've just uploaded to dante:/incoming/lm085.zip > The package contains latin modern fonts in type 1 format > and can be considered as outline replacement for ec+tc fonts. Thanks for the fonts, I installed them in fonts/ps-type1/lm For the CTAN Team Rainer Schöpf

1 0

Re: CTAN submission -- PSNFSS 9.0c
by Rainer Schöpf 21 Jul '03

21 Jul '03

On Fri, 18 Jul 2003, Walter Schmidt wrote: > I have uploaded the files psnfss9c.zip, lw35nfss.zip and > freenfss.zip to the /incoming directory at dante.ctan.org. > > Please, unpack psnfss9c.zip in the directory > > macros/latex/required/psnfss > > and copy the other zip files to the same directory, without > unpacking them. > > This is version 9.0c of the PSNFSS collection, the interface > to use the Base 35 and other free PostScript fonts with LaTeX. Thanks for the update. I replaced the directory macros/latex/required/psnfss with its new contents. For the CTAN Team Rainer Schöpf > From the change log: > > * mathptmx,sty, mathpazo.sty: upOmega and UpDelta are of > type mathord now, to make sure that they are always upright > > * pifont.sty: Pifill and dingfill should no longer fail at > the beginning or end of a paragraph. (Bug fix suggested by FMi.) > > * mathptm(x).sty: jmath, coprod, and amalg will now generate > error messages rather than print black squares. (Suggested by > FMi.) > > * Small changes to the documentation. > > * Enhanced test0.tex to test also the math alphabets. > > * 8r.enc: version 2.0, comprising all of the Mac Roman > character set, too. > > * The *.map files and the file 8r.enc have been moved out of the > ZIP archives, since their final location in the texmf tree may > vary due to changes in the TDS specs. > > > Notice that the font metrics, virtual fonts and fd files > are unchanged for the time being. The archives lw35nfss.zip > and freenfss.zip were updated only because the .map and .enc > files are no longer included there. (See the last item of > the change log.) > > The license of PSNFSS is, of course, LPPL.

1 0

Re: CTAN upload: The Font Installation Guide 1.20
by Rainer Schöpf 21 Jul '03

21 Jul '03

On Thu, 17 Jul 2003, Philipp Lehman wrote: > I've uploaded the file 'fontinstallationguide.pdf' to the incoming > directory on ftp.dante.de. This is a maintenance release. > > Please install it as CTAN:info/Type1fonts/fontinstallationguide.pdf, > replacing the previous version. Thanks for the update, I installed it as requested. For the CTAN Team Rainer Schöpf

1 0

Re: CTAN upload notification: pst-circ
by Rainer Schöpf 21 Jul '03

21 Jul '03

Christophe Jorssen and Herbert Voss uploaded: > Name of contribution: pst-circ > Summary description: pst-circ is a PSTricks package to draw electric curcuits > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > this version fixes some bugs and has new symbols for > thyristor/GTO/coil. > > Please delete _all_ files in the above dir and > save the new ones from the tgz. > thanks > ---------------------------------------------------------------------- Thanks for the update, I installed it in graphics/pstricks/contrib/pst-circ For the CTAN Team Rainer Schöpf

1 0

Re: tclldoc upload
by Rainer Schöpf 21 Jul '03

21 Jul '03

On Sun, 20 Jul 2003, Lars Hellström wrote: > I have to ftp.dante.de uploaded an archive tclldoc.tar.gz into /incoming. I > would like to have the contents placed in macros/latex/contrib/tclldoc. The > contents replace those of macros/latex/contrib/supported/tcldoc, so that > directory can be replaced by a link to macros/latex/contrib/tclldoc. (The > package has been renamed since I uploaded that.) Thanks for the upload, I installed the update to macros/latex/contrib/tclldoc and a link in macros/latex/contrib/tcldoc Note that the supported subdirectory does no longer exist, except as a link. The the CTAN Team Rainer Schöpf > The license is LPPL. > > From the README: > > The purpose of the tclldoc package and class is to > simplify using the classical doc/docstrip style of > literate programming with Dr. John Ousterhout's > Tool Command Language (Tcl, pronounced tickle, > a.k.a. The Cool Language). The tclldoc package is > a bit like the doc package is for LaTeX, whereas > the tclldoc class more parallels the ltxdoc class. > > The tools subdirectory of this directory contains > two tools that you may find useful complements to > the tclldoc package. Both are Tcl scripts that make > it possible to source Tcl code stored in a .dtx file > without using docstrip to generate any .tcl file in > between. Naturally, they are both distributed as > pairs of .dtx and .ins files, so they can also be > used as examples of using the tclldoc package. > > The examples subdirectory of this directory contains > two more examples of Tcl packages written in the > doc/docstrip style of literate programming. One is > a package for writing PDF files, the other a package > for parsing Tcl scripts. > > Lars Hellström

1 0

Re: CTAN submssion -- gensymb.sty v1.0
by Rainer Schöpf 21 Jul '03

21 Jul '03

On Fri, 18 Jul 2003, Walter Schmidt wrote: > I have uploaded the file gensymb.dtx to the /incoming > directory at dante.ctan.org. Please, move it to the > directory macros/latex/contrib/was/, thus replacing the > existing dtx file > > This is version 1.0 of the LaTeX macro package gensymb. > It provides generic commands degree, celsius, > perthousand, micro and ohm, which work in both text > and math mode. The license is LPPL. > > As compared with the previous version 0.99, the error > handling has been improved and a potential clash with > the next LaTeX release is avoided. The user interface > and the output are unchanged. Thanks for the update, I installed it in macros/latex/contrib/was/gensymb.dtx For the CTAN Team Rainer Schöpf

1 0

Re: framed.sty + headings
by Robin Fairbairns 20 Jul '03

20 Jul '03

Donald Arseneau writes (quoting a post on c.t.t): > > if a framed environment is split across pages, the headings will be > > placed too high on the page where the environment starts. > > I've uploaded version 0.8 to ctan/uk and i've installed the new version to replace the old one in macros/latex/contrib/misc; thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: CTAN submision --- humanist font
by Robin Fairbairns 18 Jul '03

18 Jul '03

> I have uploaded humanist.tar to UK incoming. Please use this to > replace the current fonts/bookhands/humanist. The distribution is > under the LPPL. > > From the README: > The humanist and allhmin packages povide Metafont fonts based on > the Humanist manuscript bookhand used from the 14th century. This is > one in a series of manuscript fonts. > > Changes in version 1.1 (2003/06/2) > o Added ae and AE conjunctions. i've installed the files as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: CTAN submission --- combine class
by Robin Fairbairns 18 Jul '03

18 Jul '03

Peter Wilson writes: > I have uploaded combine.tar to UK incoming. Please use this to > replace the current macros/latex/contrib/combine. > > The distribution is under the LPPL. > > From the README: > The combine class lets you bundle individual documents into a > single document, such as when preparing conference proceedings. > > Changes in version 0.51 (2003/07/17) > o Added macro to fix stack overflow for the combination: pdflatex + > combine + graphicx + caption2. i've installed the files as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN package installed: isi2bib-vim
by Jim Hefferon 17 Jul '03

17 Jul '03

A new package has been installed at tug.ctan.org and is right now making its way through the wire to your favorite local mirror. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ====================================================================== The following information was provided by our fellow contributor. Name of contribution: isi2bib-vim Author's name: Ajit Thakkar Location on CTAN: support/vim Summary description: Vim script to convert a bibliographic database from ISI to BiBTeX format License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- isi2bib.vim is a script that enables Vim (a popular text editor) to convert a bibliographic database from ISI (Institute of Scientific Information, Web of Science) export format to BIBTeX format. - - ----------------------------------------------------------------------

1 0

the demise of macros/latex/contrib/supported
by Robin Fairbairns 16 Jul '03

16 Jul '03

earlier this year, at a ctan planning meeting, we decided to abolish the distinction between supported and other packages installed under macros/latex/contrib the decision was made because we have watched the steady erosion of the distinction since 1994, when the sub-trees were created. for example, there were packages that plainly were supported installed under other/, while maintainers of packages installed under supported/ were unavailable to perform any maintenance. as of today, the subtrees of macros/latex/contrib have disappeared from the main ctan sites. the subtree directories other/ and supported/ will retain a shadowy (soft link) existence until the end of september 2003. (apart from the convenience of users for which addresses are memory-imprinted, the ctan team has still to complete the required changes to the catalogue: the uk faq will be up to date at its next release in a day or two). Robin Fairbairns For the CTAN team

1 0

CTAN submission -- fontinst
by Reinhard Zierke 16 Jul '03

16 Jul '03

----- Forwarded message from Lars Hellström ----- I have to ftp.dante.de uploaded an archive fontinst.tar.gz into /incoming. It contains the new fontinst release (v1.926), and the license is as usual the LPPL. I think the following will be the best course of action with this: .... 2. Place the archive contents in fonts/utilities/fontinst. 3. Delete the fontinst-prerelease hierarchy, and replace it with a link to its fontinst sibling. The reason for making a link is that there are are references to fontinst-prerelease here and there on the 'net, and it seems unnecessary to break them. .... Short quote from the README: Fontinst is a program that helps with installing fonts for (La)TeX. Since it is written entirely in TeX macros, it is completely portable. More precisely, fontinst helps mainly with the number crunching and shoveling parts of font installation. This means in practice that it creates a number of files which give the TeX metrics (and related information) for a font family that (La)TeX needs to do any typesetting in these fonts. Fontinst furthermore makes it easy to create fonts containing glyphs from more than one base font, taking advantage of e.g. expert font sets. Fontinst cannot examine files to see if they contain any useful information, nor automatically search for files or work with binary file formats; those tasks must normally be done manually or with the help of some other tool, such as the pltotf and vptovf programs. Lars Hellström ----- End forwarded message ----- Thanks for the upload. I installed the new version in CTAN:fonts/utilities/fontinst/ replacing the old version. For the time being, the link CTAN:fonts/utilities/fontinst-prerelease points to the new directory. -- Reinhard Zierke for the CTAN team

1 0

Re: package decimal
by Rainer Schöpf 15 Jul '03

15 Jul '03

On Sun, 13 Jul 2003, Apostolos Syropoulos wrote: > I have uploaded the files decimal.dtx and decimal.ins in > ftp://ftp.dante.de/incoming/decimal. This LaTeX package should be > used by people who need the traditional English decimal point, > instead of the American-style period. Please install the package > in any place you feel it is appropriate. Thanks for the upload, I installed the file in macros/latex/contrib/decimal For the CTAN Team Rainer Schöpf

1 0

CTAN package update: LaTeXPiX
by Jim Hefferon 15 Jul '03

15 Jul '03

A package has been updated at tug.ctan.org and should make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ====================================================================== The following information was provided by our fellow contributor. Name of contribution: LaTeXPiX Author's name: N.J.H.M. van Beurden Location on CTAN: systems/win32/latexpix Summary description: LaTeXPiX is a windows drawing tool for LaTeX License type: pd Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- LaTeXPiX is a windows drawing tool for LaTeX. The new version has many improvements. - - ----------------------------------------------------------------------

1 0

Re: CTAN submission -- OriyaTeX v0.99
by Robin Fairbairns 14 Jul '03

14 Jul '03

anshuman pandey writes: > I've uploaded the file oriya-tex-0.99.zip to > ftp://ftp.tex.ac.uk/incoming/. This zip archive contains files for > Oriya-TeX v0.99. These files should replace all existing materials > in /language/oriya. i've installed the files (nonfree/language/oriya, the same as the previous version). thanks for the upload. robin

1 0

new ctan item: bibcheck.sty
by Robin Fairbairns 13 Jul '03

13 Jul '03

in the course of a thread on a mailing list, cv raman mentioned a package of his, that checks that every entry in a thebibliography environment has been cited. i have (with his permission) installed the package on ctan, as macros/latex/contrib/misc/bibcheck.sty the licence of the package is gpl.

1 0

Re: CTAN upload notification: parrun
by Rainer Schöpf 13 Jul '03

13 Jul '03

On Fri, 11 Jul 2003 massimiliano dominici submitted to CTAN: > Name of contribution: parrun > Suggested location on CTAN: macros/latex/contrib/ > Summary description: typesets (two) streams of text running parallel. > License type: GNU Project > > Announcement text: > ---------------------------------------------------------------------- > For typesetting translated text and his original source, parallel on the same page, one above the other. > ---------------------------------------------------------------------- Thanks for the upload, I installed it in macros/latex/contrib/parrun For the CTAN Team Rainer Schöpf

1 0

new mail 9a3lPTKu
by lindh＠fred.cambridge.ma.us 11 Jul '03

11 Jul '03

Мы рады предложить вам новый бесплатный почтовый сервис http://www.mail15.com. Его отличительные особенности: 1) размер ящика 15 мб; 2) защищенность и надежность; 3) возможность использования любых почтовых программ(POP,IMAP,SMTP); 4) доступ из любого места в любое время; 5) простой и доступный вебинтерфейс с ПОЛНЫМ ОТСУТСТВИЕМ РЕКЛАМЫ; 6) антивирусный и антиспамовый контроль; 7) мгновенная пересылка почты. Если вы не хотите получать более данную рассылку, пишите mailto:unsubscribe@mail15.com?subject=unsubscribe ************* We are glad to invite you at new free mail service http://www.mail15.com. The advantages of this service are: 1) mailbox, up to 15 Mb; 2) absolute privacy and high reliability; 3) ability to use mail clients (POP3, IMAP4, SMTP); 4) access from anywhere, anytime; 5) flexible light-weight web interface without advertising banners; 6) antivirus and antispam control; 7) fast mail transfer; 8) high speed network channel; 9) flexible light-weight web interface; 10) wide spread ability of mail filtering and forwarding mail; 11) clock around support; If you wish to be removed: mailto:unsubscribe@mail15.com?subject=unsubscrib 39tk6HJ9Hx

1 0

Re: CTAN upload notification: Update of labbook
by Rainer Schöpf 11 Jul '03

11 Jul '03

A submission was uploaded to CTAN: > Name of contribution: Update of labbook > Suggested location on CTAN: macros/latex/contrib/labbook > Summary description: Typeset laboratory journals. > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > From the description: > > labbook.cls - a document class that produces an index of sectioning commands > > This class is designed to typeset laboratory journals that contain chronologically ordered records about experiments. From the sectioning commands, an experiment index is generated. The class is based on the KOMA-Script class scrbook.cls. > > The update fixes some annoying bugs and introduces some new features. First of all, there can now be several index entries for one experiment > > ---------------------------------------------------------------------- Thanks for the update, I installed it. For the CTAN Team Rainer Schöpf

1 0

ecltree updated
by Robin Fairbairns 11 Jul '03

11 Jul '03

the ecltree macros, which have been dormant for *ages*, have now been updated, by frank mittelbach with the authors permission, for better performance with current latex. (in parallel, i've done minor modernisation of the documentation.) i've installed the new version in macros/latex/contrib/eclbip (the old macros/latex209/contrin/eclbip directory has moved to the the obsolete/ tree). the licence is now lppl. Robin Fairbairns For the CTAN team

1 0

new mail CYP2l78t
by thehobbit＠greenwoodsoftware.com 11 Jul '03

11 Jul '03

Мы рады предложить вам новый бесплатный почтовый сервис http://www.mail15.com. Его отличительные особенности: 1) размер ящика 15 мб; 2) защищенность и надежность; 3) возможность использования любых почтовых программ(POP,IMAP,SMTP); 4) доступ из любого места в любое время; 5) простой и доступный вебинтерфейс с ПОЛНЫМ ОТСУТСТВИЕМ РЕКЛАМЫ; 6) антивирусный и антиспамовый контроль; 7) мгновенная пересылка почты. Если вы не хотите получать более данную рассылку, пишите mailto:unsubscribe@mail15.com?subject=unsubscribe ************* We are glad to invite you at new free mail service http://www.mail15.com. The advantages of this service are: 1) mailbox, up to 15 Mb; 2) absolute privacy and high reliability; 3) ability to use mail clients (POP3, IMAP4, SMTP); 4) access from anywhere, anytime; 5) flexible light-weight web interface without advertising banners; 6) antivirus and antispam control; 7) fast mail transfer; 8) high speed network channel; 9) flexible light-weight web interface; 10) wide spread ability of mail filtering and forwarding mail; 11) clock around support; If you wish to be removed: mailto:unsubscribe@mail15.com?subject=unsubscrib zvTy1q7FFv

1 0

Re: xdoc upload
by Rainer Schöpf 08 Jul '03

08 Jul '03

On Tue, 8 Jul 2003, Lars Hellström wrote: > I have to ftp.dante.de uploaded an archive xdoc.tar.gz into /incoming. It > contains a directory xdoc with the six files: > README.txt > docindex.dtx > docindex.ins > xdoc2.dtx > xdoc2.ins > xdocdemo.tex > and I would like to have them put in /macros/latex/contrib/xdoc. The > licence that applies is the LPPL. > > This is an update of the material in /macros/latex/exptl/xdoc, so that > directory and its contents can be removed. It should probably be replaced > by a link to the new contrib/xdoc directory. > > BTW, am I right if I assume that you are in a process of moving the > previous contents of /macros/latex/contrib/other and > /macros/latex/contrib/supported to simply /macros/latex/contrib? (It > certainly looks that way in the archive.) Yes, we are. We announced this on the ctan-ann mailing lsit a while ago. Thanks for the upload, I installed the new material in macros/latex/contrib/xdoc and changed the directory macros/latex/exptl/xdoc to a link to the new one. For the CTAN Team Rainer Schöpf > > On what these files are: > > xdoc2.dtx: > The xdoc2 package contains reimplementations of some of > the features found in the standard LaTeX doc package > by Mittelbach et al. Amongst other things, these > reimplementations provide support for: > * definiting new commands similar to DescribeMacro and > new environments similar to the macro environment, > * two-sided document layouts, > * sorting of version numbers as 2 < 11 < 100 > (if they are marked up using uintver), > * external cross-referencing, > * making index entries for invisible characters, > * optionally ignoring certain prefixes (such as @ and > @@) in macro names when sorting them. > The xdocdemo document demonstrates a couple of these > features. > > I consider the xdoc2 package to merely be the second > prototype for an (as yet nonexistant) package xdoc which > should provide the same features (and more). I have > decided to release the prototype to make its functionality > generally avaiable, but under a variant name to avoid > future incompatibility problems. (E.g., the final xdoc > package will probably use many LaTeX2e* features that are > still on the prototype stage. xdoc2, on the other hand, > uses no LaTeX2e* features.) > > docindex.dtx: > docindex.dtx contains a reimplementation of the doc mechanisms for > sorting and formatting a sorted index. docindex.ins installs two forms > of this package: docindex (which is a LaTeX2e* package) and docidx2e > (which works with the normal LaTeX2e). The main advantage of these > packages over the doc mechanisms is that configuration has been made > much easier.

1 0

CTAN package update: LaTeX4Jed
by Jim Hefferon 08 Jul '03

08 Jul '03

A package has been updated at tug.ctan.org and it should make its way to a mirror near you in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ==================================================================== The following information was provided by our fellow contributor. Name of contribution: LaTeX4Jed Author's name: Guido Gonzato, Ph.D. Location on CTAN: support/jed Summary description: A much enhanced LaTeX mode for the Jed editor. License type: gpl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This LaTeX4Jed update introduces many new features: the ability to work on compressed files, new shortcuts, improved indentation of environments, and better documentation. - - ----------------------------------------------------------------------

1 0

Re: sorry ...
by Robin Fairbairns 07 Jul '03

07 Jul '03

Peter Wilson writes: > I have uploaded memupdate.tar.gz to UK incoming. Please use this > to replace some of the files in > macros/latex/contrib(/supported?)/memoir. > > The distribution is under the LPPL. > > From the README: > > Memoir is a flexible class for typesetting general fiction, > non-fiction and mathematical works as books, reports, articles or > manuscripts. Documents can use 9, 10, 11, 12, 14, or 17pt as the > normal font size. Many methods are provided to let you create your > particular design. > > Changes (2003/06/28) > O New version 1.6 of mempatch.sty (improved even/odd page checking, > page layout, and bug fixes). > O New version of the Addendum (memmanadd.pdf) > O New version of the README. > O NO CHANGES TO ANY OTHER FILE. i've moved memoir down to macros/latex/contrib/memoir, and i've installed the files. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN submission -- ps2eps 1.45
by Reinhard Zierke 07 Jul '03

07 Jul '03

----- Forwarded message from Roland Bless ----- - I just uploaded an updated version of the ps2eps tool to ftp.dante.de. It's all in the subdir /incoming/ps2eps. - You can replace the existing version in support/ps2eps - The program is licensed under gpl. Due to a major bugfix, please announce the update -- if admissible -- as follows to CTAN-ANN. ps2eps 1.45 in CTAN:support/ps2eps ================================== ps2eps is a tool to produce Encapsulated PostScript Files (EPS/EPSF) from usual one-paged Postscript documents. It calculates correct Bounding Boxes for those EPS files and filters some special postscript command sequences that can produce errorneous results on printers. You need: - perl (an interpreter for the perl language, see http://www.perl.com) - ghostscript (an interpreter/raster image processor for the PostScript language, see http://www.cs.wisc.edu/~ghost/) - maybe an ANSI-C compiler if you don't use Linux, Solaris, Digital Unix, HP-UX or Windows 9x/NT/2000. - The program is licensed under gpl. Main changes 1.39 -> 1.45 ---------------------------- Please note: Versions <=1.42 may have changed postscript output by filtering too much postscript instructions. This could have been lead to wrongly colored boxes and text. Please consider re-running ps2eps over your files now. Sorry for the inconvenience! - corrected filter for deleting initclip instead of rectangles - option processing is done by GetOpt, i.e. long options are available, too. Syntax for -s has changed therefore. - Wildcards are resolved within the program, thus Windows users will profit from it. ----- End forwarded message ----- Thanks for the upload. I installed it as suggested replacing the old version in CTAN:/support/ps2eps/ Reinhard Zierke for the CTAN team

1 0

Re: Upload announcement (octavo class)
by Robin Fairbairns 06 Jul '03

06 Jul '03

Stefan A. Revets writes: > Please find here hopefully complete and relevant details of an > upload I have made today to CTAN. As this is my first attempt at > writing a LaTeX package, I welcome any comments or suggestions you > may have before putting the package on CTAN. i've had a quick look, but i see no reason not to install your submission as it stands. > Name of the package: octavo.zip (containing octavo.dtx, octavo.ins, read.me) > CTAN upload node: ftp.tex.ac.uk > Suggested repository: macros/latex/contrib/supported/octavo > Licensing conditions: lppl > Summary of the package: > Octavo provides a modification of the standard LaTeX book class > to typeset books following classical layout and design > principles. In particular, book formats are set to classical > sizes such as foolscap, crown, post, demy, etc., margins are set > harmonically, an attempt is made to maintain a constant grid of > printed lines throughout the text, and the page styles are > defined more discretely. The documentation includes methods to > produce signatures so that books can actually be made by the > user. i've actually installed the files in macros/latex/contrib/octavo, since the supported/misc distinction is disappearing and all of both directories is being moved into contrib/ thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN package upgrade: Progress
by Jim Hefferon 03 Jul '03

03 Jul '03

An upgrade has been made to the CTAN package described below and by now it should have made its way to your favorite local mirror. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ====================================================================== The following information was provided by our fellow contributor. Name of contribution: Progress Author's name: Kasper B. Graversen Location on CTAN: macros/latex/contrib/progress Summary description: Progress is a package which when compiling LaTeX documents, generates a HTML file giving an overview of the documents state (of how finished its parts are). License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- The package has become more configurable and now allows a graphical representation of progress as an alternative to the textural one. Finally, the two representations can easily be combined or used alternativly as done in the progress.dvi file in the archive. - - ----------------------------------------------------------------------

1 0

CTAN package upgrade: Manuscript
by Jim Hefferon 01 Jul '03

01 Jul '03

The a package has been upgraded on the tug.ctan.org node of CTAN and through the magic of automatic mirroring should make its way to your favorite local mirror quite soon. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ======================================================================= The following information was provided by our fellow contributor. Name of contribution: Manuscript Author's name: Matej Cepl Location on CTAN: macros/latex/contrib/manuscript Summary description: LaTeX package emulating look of document typed on typewriter License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- Purpose of this package is to emulate appearance of the document written on classical typewriter as much as possible. Originally created as a response to backward looking demands for layout created for typewriters, it now tries to emulate them as much as possible. It may be even useful, when the directions are non-negotiable. - - ----------------------------------------------------------------------

1 0

New on CTAN: numalg.bst
by Jim Hefferon 30 Jun '03

30 Jun '03

A new package has been installed at tug.ctan.org and should make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org =========================================================== The following information was provided by our fellow contributor. Name of contribution: numalg.bst Author's name: Richard J Mathar Location on CTAN: biblio/bibtex/contrib Summary description: BibTeX style for Kluwer's Numerical Algorithms License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- A BibTeX style file for the journal Numerical Algorithms published by Kluwer. - - ----------------------------------------------------------------------

1 0

Re: upload (new version of) mimetex.zip to ftp.tex.ac.uk
by Robin Fairbairns 27 Jun '03

27 Jun '03

John Forkosh writes: > As per your README.uploads instructions... > + what you've uploaded > mimetex.zip > (version 1.01, or 3.14 if you prefer, to replace > support/mimetex/mimetex.zip) > + which CTAN node you've uploaded to > ftp.tex.ac.uk > + where you want the files to go > support/mimetex > Please REPLACE all existing files (mimetex.zip and README) in > support/mimetex (please unzip mimetex.zip README and place > this separate copy of README alongside mimetex.zip in the > support/mimetex directory) > + what licensing conditions you apply to your software > GNU GPL > + brief summary of what your upload is intended to do. > (a) New features: optional lowpass text anti-aliasing for gif images, > and optional HTTP_REFERER check blocks use from unwanted domains. > (b) Also: several (very obscure:) bug fixes. > From original submission... > MimeTeX parses LaTeX math expressions, and emits either > mime xbitmaps or gif images of them, rather than TeX dvi's. > Therefore, mimeTeX's images can be directly used by html > documents in the form, e.g., > <img src=../cgi-bin/mimetex.cgi?f(x)=int_{-infty}^x~e^{-t^2}dt > border=0 align=absmiddle> > without intermediate dvi-to-gif conversion, and without storing > lots of resulting little gif files, one file for each converted > expression. This makes your html documents more readable and > easily maintained. See > http://www.forkosh.com/mimetex.html#examples > for examples demonstrating mimeTeX's features and usage. > MimeTeX isn't primarily meant for latex2html-like tasks > where you're maintaining native LaTeX documents that are later > redistributed in several formats, including html. Rather, mimeTeX > is primarily meant to help maintain native html documents containing > math. In this sense it's a kind of lightweight alternative to > MathML, with the advantage that mimeTeX preserves LaTeX syntax. > Similar non-MathML packages, like textogif and gladTeX, > require setup procedures that use TeX to help generate external > gif images of your equations, which are later included > in your html document as it's being rendered. MimeTeX, as far > as I know, is the only such non-MathML package that has its > own built-in parser and rendering engine, entirely independent > of TeX, and therefore requires no setup procedure or external > images whatsoever. It renders realtime, on-the-fly images > directly from LaTeX math expressions embedded in html documents. i've installed the (revised) file as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

new package on CTAN: MLA package
by Jim Hefferon 26 Jun '03

26 Jun '03

A new package has been installed on tug.ctan.org and should soon propagate to your favorite local mirror. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ===================================================================== The following information was provided by our fellow contributor. Name of contribution: mla-paper Author's name: Ryan Aycock Location on CTAN: macros/latex/contrib/mla-paper Summary description: This package allows for proper MLA formatting License type: bsd Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- LaTeX is a wonderful tool that has long been known for typesetting scientific papers books. Unfortunately, when it comes to the humanities, writers are left out in the cold due to the lack of packages for writing in the MLA style. The aim of this package is to allow students and other academics properly typeset their materials with minimal effort on their part. - - ----------------------------------------------------------------------

1 0

Re: CTAN upload notification: References
by Reinhard Zierke 26 Jun '03

26 Jun '03

> A submission was uploaded to nova.dante.de:/ftp/incoming/upload-20030626.001/. > > The following information was provided by our fellow contributor: > > Name of contribution: References > Name and email: Volker Kiefel > Suggested location on CTAN: tex-archive/support/references > Summary description: Bibliographic software supporting LaTeX/BibTeX > License type: GNU Project > > Announcement text: > ---------------------------------------------------------------------- > REFERENCES is bibliographic software for authors of > scientific manuscripts and for management of > bibliographic data of ARTICLES IN JOURNALS, of BOOKS > and of CHAPTERS IN BOOKS and other document types > including notes and electronic documents. REFERENCES > supports LaTeX including BibTeX. Bibliographic records > in MEDLINE format are easily converted. Retrieval of > references by keywords, authors' or editors' names, > date of publication, title of article, book title, > journal name or combinations thereof is possible. > Lists of references can be compiled in any > bibliographic style required by the publishers of > scientific journals. REFERENCES is provided with a text > based console interface compiled for win32-systems, an > external text editor is required for editing data. > ---------------------------------------------------------------------- Thanks for the upload. I installed it as suggested replacing the old version in CTAN:support/references/. Reinhard Zierke for the CTAN team

1 0

Re: Upload: bitfield.dtx
by Robin Fairbairns 25 Jun '03

25 Jun '03

Reuben Thomas writes: > I want to withdraw a package I have previously submitted to CTAN. The > reason for this is that there's now a superior package on CTAN that > performs the same function rather better, and I want to avoid confusion > among users. I have often wasted time when I have found two or three > different packages that do the same job, because I have to evaluate them > in order to pick the one I should use. I want to spare other users this > tedium by removing my inferior package. > > In my opinion my bitfield package is superseded by bytefield. I would > certainly use bytefield in future rather than my package. The few features > that bytefield does not provide which bitfield provides are, I think, > unnecessary, and a result of my lack of understanding of typesetting. > > Below is a list of what I originally uploaded: > > > As per README.uploads: > > > > + what you've uploaded > > > > bitfield.dtx, bitfield.ins > > > > + which CTAN node you've uploaded to > > > > cam.ctan.org > > > > + where you want the files to go > > > > macros/latex/contrib/supported/bitfield/ i have moved bitfield from the macros tree (it had migrated to macros/latex/contrib/bitfield) to the corresponding place on the obsolete tree, but it will remain in the incorrect place in the catalogue until that is next updated (not under my control). Robin Fairbairns For the CTAN team

1 0

Re: Upload to ftp.tex.ac.uk -- textpos v1.3
by Robin Fairbairns 25 Jun '03

25 Jun '03

Norman Gray writes: > + what you've uploaded > > textpos-1.3.tar.gz > > + which CTAN node you've uploaded to > > ftp.tex.ac.uk/incoming > > + where you want the files to go > > tex-archive/macros/latex/contrib/supported/textpos/ > ...replacing the files already there in fact, it's become macros/latex/contrib/textpos (we're phasing out the supported directory). > + what licensing conditions you apply to your software (see list > below). > > GPL > > + a brief summary of what your upload is intended to do. > > Version 1.3 adds the extblockcolour command, specifying the > background colour of text blocks. thanks for the upload: installed as noted. Robin Fairbairns For the CTAN team

1 0

New CTAN package: pst-circ
by Jim Hefferon 25 Jun '03

25 Jun '03

A new package has been installed on tug.ctan.org and it should make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ===================================================================== The following information was provided by our fellow contributor. Name of contribution: pst-circ Author's name: Christophe Jorssen Location on CTAN: graphics/pstricks/contrib/pst-circ Summary description: PSTricks package for drawing electric circuits License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- pst-circ is a package built above PSTricks and in particular pst-node. It can draw easily current dipoles, some tripoles and quadrupoles used in elecronic or electric theory. For a presentation, see http://pstcirc.free.fr - - ----------------------------------------------------------------------

1 0

Re: CTAN submission -- pdfpages v0.3a
by Rainer Schöpf 21 Jun '03

21 Jun '03

On 21 Jun 2003, Andreas Matthias wrote: > I have uploaded the archive file `pdfpages-v0.3a.tar.bz2' to > ftp.dante.de/incoming. > > Please, extract this archive and replace the files in > > /tex-archive/macros/latex/contrib/pdfpages/ > > This version adds support for VTeX. > > The `pdfpages' package makes it easy to insert pages of > external PDF documents. Several logical pages can be > arranged onto each sheet of paper. The package provides > hypertext operations like hyperlinks and article threads. > > It is distributed under the LPPL. Thanks for the update, I installed it in: macros/latex/contrib/pdfpages For the CTAN Team Rainer Schöpf

1 0

Re: CTAN upload notification: ps4pdf v0.6c
by Rainer Schöpf 21 Jun '03

21 Jun '03

A submission was uploaded to CTAN by Rolf Niepraschk: > Name of contribution: ps4pdf v0.6c > Suggested location on CTAN: macros/latex/contrib/ps4pdf/ > Summary description: Using Postscript code in pdfLaTeX documents > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > Changes: > o The name of the graphics container can now be changed. > o A document without any PSforPDF commands creates now > an empty container file. > ---------------------------------------------------------------------- Thanks for the update, I installed it. For the CTAN Team Rainer Schöpf

1 0

uk tug faq v3.7
by Robin Fairbairns 20 Jun '03

20 Jun '03

i've just installed v3.7 of the faq, on the web (www.tex.ac.uk/faq) and on ctan in directory help/uk-tug-faq. apart from the steady accretion of answers, there have been big changes in: - quality of pdf from postscript, which has been split into several bite-sized chunks, following a complaint from a user that it was too daunting (http://www.tex.ac.uk/cgi-bin/texfaq2html?label=dvips-pdf) - installing files, which has gained the first few of a series about installing fonts. these have proved extremely difficult to write: striking a balance between accessibility and completeness, while retaining the crucial compactness needed of a faq answer, has taxed my feeble writing skills something rotten (http://www.tex.ac.uk/cgi-bin/texfaq2html?label=instfont is the first of the series; follow next question to review the set) in addition, the ctan distribution also includes an archive of the static html version of the faq that i've been offering to distribution builders for some time: see FAQ-html.tar.gz Robin Fairbairns For the CTAN team (my apologies to c.t.t people: i can't announce things to ctan-ann without bothering you.)

1 0

new package on CTAN: igo
by Jim Hefferon 18 Jun '03

18 Jun '03

A new package has been installed on tug.ctan.org and should make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim ================================================================= The following information was provided by our fellow contributor. Name of contribution: igo Author's name: Étienne Dupuis Location on CTAN: fonts/igo Summary description: Fonts and macro to typeset Go diagrams License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- The package igo is based on go, a package written in 1991 by Hanna Kolodziejska which provides typesetting facilities for Go games and positions. Although igo contains roughly the same commands as the original package and uses the fonts created by Kolodziejska, it has (hopefully) been improved by 1. Using command names less likely to conflict with standard AMS packages; 2. Allowing different board sizes to be used; 3. Understanding a standardized notation for board coordinates; 4. Providing the facility to work on more than one board. Moreover, a few commands were reworked to define positions or game sequences more conveniently. - - ----------------------------------------------------------------------

1 0

Re: CTAN upload notification: bmeps 1.0.7
by Rainer Schöpf 18 Jun '03

18 Jun '03

A submission was uploaded CTAN. The following information was provided by our fellow contributor: > Name of contribution: bmeps 1.0.7 > Suggested location on CTAN: /support/bmeps > Summary description: bmeps 1.0.7 - Converter from PNG/JPEG/NetPBM to EPS > License type: GNU Library > > Announcement text: > ---------------------------------------------------------------------- > Overview: > This package contains a library and a command line program > to convert from PNG/JPEG/NetPBM to EPS. Different > compression and encoding mechanisms are available > when producing the EPS output file. > Suggestions how to modify dvips to use the library are > included too. > > Update contents: > When running as a filter the program calls setmode() > to switch standard input into binaray mode before > the image is read. This is neccessary on some operating > systems - i.e. Windows - to process images from standard > input properly. > > > ---------------------------------------------------------------------- Thnaks for the update, it was installed as requested. For the CTAN Team Rainer Schöpf

1 0

Directory language/spanish
by Reinhard Zierke 16 Jun '03

16 Jun '03

----- Forwarded message from Javier Bezos ----- I've uploaded to the Dante server the file spanish.zip. Until now, the language/spanish directory was a mess, with several hyphenation files (some of them wrong) and very outdated information. Please, remove the whole contents of that directory and replace it by the files inside spanish.zip, namely: readme.txt obsolete/eshyph.tex obsolete/sphyph/shyphen.sh obsolete/sphyph/sphyph.tex hyphen/readme.txt hyphen/division.pdf hyphen/eshyph.tex Replace the file eshyph.tex under language/hyphenation by the new one (ie, hyphen/eshyph.tex), too. ----- End forwarded message ----- Thank you very much for cleaning this up. I installed the new version as suggested in CTAN:language/spanish and a link from language/hyphenation/eshyph.tex to language/spanish/hyphen/eshyph.tex Reinhard Zierke for the CTAN team

1 0

Re: CTAN upload notification: TeXlogos
by Rainer Schöpf 13 Jun '03

13 Jun '03

A submission was uploaded to CTAN The following information was provided by our fellow contributor: > Name of contribution: TeXlogos > Name and email: Jacek Ruzyczka > Suggested location on CTAN: > Summary description: Defines a number of ready-to-use LaTeX logos. > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > TeXlogos defines an assortment of frequently used logos > not contained in base LaTeX itself - for instance: > *) the METAFONT, METAPOST, AMS, BibTeX and SliTeX logos > (you only need the appropriate CM/Logo/AMS fonts) > *) currency symbols which do NOT require TCRM fonts: > Euro, Cent, Yen, Won, Naira > *) the C++ logo with the '+' signs properly positioned > *) the logo of the Vienna University Business > Administration Center (BWZ) > > ---------------------------------------------------------------------- Thanks for the submission. It was installed in macros/latex/contrib/texlogos For the CTAN Team Rainer Schöpf

1 0

Re: missing files
by Rainer Schöpf 13 Jun '03

13 Jun '03

On Thu, 12 Jun 2003, Apostolos Syropoulos wrote: > I have uploaded to ftp://ftp.dante.de/incoming the file OInuit.zip > This file contains four TFM files that are missing from the package > oinuit located in /pub/tex/languages/inuktitut/oinuit. Please create > the directory /pub/tex/languages/inuktitut/oinuit/tfm and install the > TFM files there. In addition, replace the file > /pub/tex/languages/inuktitut/oinuit/lambda/oinuit.dtx with the file > that is included in the ZIP file. The old file contains a tiny bug. Thanks for the update, I installed it in languages/inuktitut/oinuit For the CTAN Team Rainer Schöpf

1 0

CTAN package upgrade: progress
by Jim Hefferon 13 Jun '03

13 Jun '03

A package has been upgraded at the tug.ctan.org node of CTAN and should make its way through the system to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ======================================================================== The following information was provided by our fellow contributor. Name of contribution: progress Author's name: Kasper B. Graversen Location on CTAN: macros/latex/contrib/progress Summary description: Progress is a package which when compiling LaTeX documents, generates a HTML file giving an overview of the documents state (of how finished its parts are). License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- Progress is a package which when compiling LaTeX documents, generates a HTML file giving an overview of the documents state (of how finished its parts are). This is a new version which replaces the old files in the catalogue. New is progressReportName option to control report filename and a small bugfix. - - ----------------------------------------------------------------------

1 0

Re: CTAN upload notification: serto
by Rainer Schöpf 12 Jun '03

12 Jun '03

On Wed, Johannes Heinecke submitted: > Name of contribution: serto > Suggested location on CTAN: languages/aramaic > Summary description: syriac fonts, style-files and a preprocessor to typeset Syriac (Aramaic) > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > This package enables (La)TeX users to typeset words or phrases (elatex > needed) in Syriac (Aramaic) using the Serto-alphabet. The package > includes a preprocessor written in Pythin (>= 1.5.2) in order to deal > with the right-to-left typesetting for those who do not want to use > elatex and to choose the correct letter depending on word context > (initial/medial/final form) > Detailed documentation and examples are included. > > ---------------------------------------------------------------------- Thanks for the upload, I installed it in languages/aramaic/serto For the CTAN Team Rainer Schöpf

1 0

Re: Upload of archive teubner.zip
by Rainer Schöpf 12 Jun '03

12 Jun '03

On Thu, 12 Jun 2003, Claudio Beccari wrote: > I just uploaded a new version of my previous teubner.zip package. It should > replace the existing package in the teubner folder that already exists on > the CTAN. > > The material as always is free under th lppl. > > The update corrects some small glitches, but most important of all refers > explicitely to the recently uploaded CB greek fonts in scalable pfb format > that are available since past november on CTAN. Thanks for the update, I installed it in macros/latex/contrib/teubner For the CTAN Team Rainer Schöpf

1 0

Re: CTAN submission: Euler-VM fonts 3.0
by Rainer Schöpf 12 Jun '03

12 Jun '03

On Thu, 12 Jun 2003, Walter Schmidt wrote: > the ZIP archive file eulervm-30.zip has been uploaded to > the /incoming directory at dante.ctan.org. Please, unpack > it into the directory > > fonts/eulervm > > Doing so will update all files in this directory and in the > subdirectories tfm/, vf/ and fontinst/, and add also some new > files (in fontinst/). > > This is version 3.0 of the Virtual Euler Math fonts and the > related LaTeX macros. > > From the change log: > > * The symbols leq and geq now show the shape that is > preferred by DEK in conjunction with the Euler fonts. > (Credits to Frank Mittelbach for pointing me to this!) > The width of the symbols is unchanged. > > * The package option [small] now acts on the AMS fonts, > too, so there are no more restrictions affecting the > usage of amssymb.sty in conjunction with the Euler fonts. > > * Slightly changed mapping of font sizes to design sizes > used. Particularly, when a math font with a size of 8pt is > requested, we are now going to scale up a 7pt font, rather > than scaling down a 10pt one. This should improve the > apprearance of documents with a normal font size of 11pt, > where 8pt is used for super- and subscripts. Strictly > speaking, this is an incompatible change, but I hope that > the amount of practical problems is tolerable, as compared > with the improvement. > > * Fixed Makefile so as not to install the auto-generated FD > files, which are lacking the code for the [small] option. > > * VFs and TFMs were now generated using the latest version of > fontinst. As a result, the font metrics have changed slightly, > because of the improved rounding algorithm. This may cause > problems when procesing existing DVI files, but the metrics are > definitely correct now. Thanks for the update, I installed it as requested. For the CTAN Team Rainer Schöpf

1 0

Re: CTAN upload notification: savesym
by Rainer Schöpf 11 Jun '03

11 Jun '03

On Wed, 11 Jun 2003 Jürgen Göbel submitted the following contribution: > Name of contribution: savesym > Suggested location on CTAN: macros/latex/contrib/savesym > Summary description: saves and restores symbols > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > There are a number of symbols (e.g., Square) that are defined by multiple packages. In order to typeset all the > variants in a document, we have to give glyph a unique > name. To do that, we define savesymbol{XXX}, which renames a symbol from XXX to origXXX, and > estoresymbols{yyy}{XXX}, which renames origXXX back to > XXX and defines a new command, yyyXXX, which corresponds > to the most recently loaded version of XXX. > ---------------------------------------------------------------------- Thanks for the upload, I installed the file in directory macros/latex/contrib/savesym For the CTAN Team Rainer Schöpf

1 0

Re: CTAN Submission -- Devanagari for TeX version 2.02
by Robin Fairbairns 11 Jun '03

11 Jun '03

Anshuman Pandey writes: > I have uploaded velthuis.zip to the 'incoming' directory at > ftp.tex.ac.uk. This zip archive contains version 2.02 of the > Velthuis Devanagari for TeX package. > > This package belongs in /language/devanagari. There are three > directories under this CTAN directory: 'contrib', 'distrib', and > 'omega'. Please remove the 'contrib' and 'distrib' directories. The > contents of those directories have been revised; some are included > in this latest update, some are obsolete. > > Please unpack velthuis.zip into a new directory called 'velthuis'. > > You may post a message to comp.text.tex informing readers of the new > release if you wish. i've installed the new files, and deleted the old, as requested. thanks for the upload. in summary, the whole of the old devanagari/contrib and /distrib directories are replaced (or superseded) by a new subtree devanagari/velthuis; the existing subtree devanagari/omega is untouched. Robin Fairbairns For the CTAN team

1 0

CTAN package update: ePiX
by Jim Hefferon 08 Jun '03

08 Jun '03

An update has been done of this package at tug.ctan.org and it should propagate to a mirror near you quite soon. Thanks for the material, Jim Hefferon ftpmaint(a)tug.ctan.org =================================================================== The following information was provided by our fellow contributor. Name of contribution: ePiX Author's name: Andrew D. Hwang Location on CTAN: graphics/epix Summary description: Utility for mathematically accurate, camera quality plots and line figures License type: gpl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- ePiX is now capable of true perspective drawing and plotting. Other new features are too numerous to announce; please see the documentation. - - ----------------------------------------------------------------------

1 0

Re: CTAN Submission -- lettrine
by Rainer Schöpf 06 Jun '03

06 Jun '03

On Fri, 6 Jun 2003, Daniel Flipo wrote: > I have just uploaded into ftp.dante.de/incoming a file lettrine.tar.gz, > which contains an upgrade (V 1.4b) of the lettrine package designed to > typeset various sorts of dropped capitals. > > It should replace the old version in 'macros/latex/contrib/lettrine'. > > The license is unchanged (LPPL). > > This is a minor release, apart from cosmetic changes to the .dtx file, > a new demo file in German has been added (contribution of Georg Wagner), > the French demo file has been updated too. Thanks for the update, I installed it. For the CTAN Team Rainer Schöpf

1 0

Updates by Heiko Oberdiek
by Rainer Schöpf 06 Jun '03

06 Jun '03

On Fri, 6 Jun 2003, Heiko Oberdiek wrote: > I have uploaded pagesel.dtx and pagesel.ins in the > /incoming directory of ftp.dante.de. They update the > files in the directory > CTAN:macros/latex/contrib/supported/oberdiek/ > > The licence: LPPL 1.2. > > Changes: > * Fix, if more than maxdeadcycles pages are omitted. > I have uploaded engord.sty in the /incoming directory > of ftp.dante.de. It replaces the file in > CTAN:macros/latex/contrib/supported/oberdiek/ > > The licence remains LPPL 1.2. > > Changes: > * Bug fix for 30, 40, 50, ..., 100, 130, ... > * ordletters renamed to documented engordletters. Thanks for the updates, I installed the three files in macros/latex/contrib/supported/oberdiek For the CTAN Team Rainer Schöpf

1 0

Re: CTAN Upload - BaKoMa 5.50 - SVG/Animated Presentations
by Rainer Schöpf 06 Jun '03

06 Jun '03

Basil K. Malyshev submitted an update to the BaKoMa package. I installed all files in nonfree/system/win32/bakoma For the CTAN Team Rainer Schöpf > ------------------- ORIGINAL MESSAGE --------------------- > > I have uploaded to `ftp.dante.de/incoming/bakoma' directory > update for BaKoMa TeX 5.50 (issued 1-Jun-2003). > > Please put the files to 'CTAN:systems/win32/bakoma' directory. > > BaKoMa TeX 5.50 introduces generation of SVG (Scalable Vector Graphics) > from a DVI files. Ability to add animation to the SVG output, > makes it the best for producing high quality presentations. > > Sample of animated presentation is available at: > ftp://ftp.dante.de/tex-archive/systems/win32/bakoma/samples/index.html > > Key Features: > SVG output is compatible with another output formats > (PDF, PS, HTML, View, and Print) so, that the same graphical > formats, font formats, and other features are supported. > In details: > * All TeX Formats (LaTeX 2e, LaTeX 2.09, AmSTeX, Plain TeX) are supported. > * TeX extensions (e-TeX and Omega) are supported. > * ALL LaTeX packages (including PSTricks, PSFrag, graphics, draftcopy, etc.) > are supported. > * Graphical formats: EPS, JPEG, PNG, GIF, TIFF, PCX, MSP, > BMP, WMF, EMF, HPGL, and DXY are supported. > * More generally, Any imported or embedded Postscript is supported. > * Hyperref is supported, including outline and links. For Acrobatmenu > most general commands (such as NextPage or PrevPage) are supported. > * Popular presentation packages: Prosper, PDFScreen, PDFSlide, Seminar, etc. > are supported. > *** The existing presentations can be enhanced by adding animation. > * All Font Types: OpenType (OTF/TTF), TrueType, Postscript Type1 > (including MM), Postscript Type 3, and TeX PK are supported. > > More information about adding animations is at: > <ftp://ftp.dante.de/tex-archive/systems/win32/bakoma/programs/changes5.html> > > Bye. > Basil K. Malyshev > 2-Jun-2003 > > PS: Please send announce to appropriate mailing lists and news groups. > > --------------- About BaKoMa TeX 5.50 ---------------------- > > CONTENTS > * Highlights > * Graphical Capabilities > * Fonts > * User Interface > * PDF Generation Features > * HTML Generation features > * New Features of BaKoMa TeX 5.50 > > For more information about BaKoMa TeX see > <ftp://ftp.tex.ac.uk/tex-archive/systems/win32/bakoma/index.html> > > BaKoMa TeX is a complete TeX system for Microsoft Windows XP/2000/NT/98/95 > > HIGHLIGHTS > > * BaKoMa TeX is PostScript enabled TeX system. > * Dynamical Preview allows the user to preview instantly selected region > of the file being edited. > (like to Instant Preview - http://www.activetex.org). > ** Generates *PDF* from documents with *PSTricks*, *PSfrag*, etc. > ** Generates HTML (TeX4HT, DVI2HTML), also supports Hevea and TTH. > * Supports using PostScript Type 1 fonts (including MM) *WITHOUT ATM*. > However, using ATM for font rendering is optionally available. > * Complete distribution includes about *1500* TeX Fonts (including EC/TC, LH) > in ATM Compatible PostScript Type 1 font format. > * Font Setup Wizard installs OpenType/TrueType/Postscript fonts in one click > * Consistent graphics and font support for all DVI back-ends. > * BibEdit - editor for LaTeX BIB files is included. > * Supports hyperlink text broken across lines and pages. > * Easy to install and use. > * Much less expensive than other analogues. > > GRAPHICAL CAPABILITIES > > BaKoMa TeX includes an interpreter for *PostScript Level 2*, > which is tested for compatibility with output from popular > software such as: MetaPost, Adobe Illustrator 10, Adobe Streamline 4.0, > Mathematica 4, MatLab, CorelDraw 10, CorelXARA, HIGZ, PageDraw, > FrameMaker, ImageMagick, etc. > > All DVI back-ends support the same special interface compatible > with well known Rokicki's DVIPS, including processing PostScript > embedded into DVI files (PSTricks, PSfrag, XyPic, etc.). > > The system includes Graphics Import Filters for the following formats: > PostScript, HPGL, DXY, JPEG, PNG, GIF, TIFF, PCX, MSP, BMP. > > FONTS > > BaKoMa TeX supports the following font formats: > * OpenType (both TTF and OTF are supported), > * PostScript Type 1 (including Multiple Masters), > * PostScript Type 3, > * TrueType, > * TeX PK/VF. > > The system includes about *1500* typefaces in PostScript Type 1 > and Type 3 font format including the following fonts: > * CM (including LaTeX and Logo fonts + vf for T1 with CX > * AMS Fonts (Euler, Math Symbols), > * EC/TC, > * LH (T2A), > * Concrete (Math, ECC), > * Malvern, > * CMCyr + vf for T2A/LCY > * Scripting fonts, CMPica, Punk. > Math Fonts: > * Stmaryrd, Wasy, Rsfs, YHMath, BlackBoard (bbm, doublestroke). > Diagram drawing fonts: > * Lams, Astro Symbols (cmastro, astrosym, moonphase), > * Barcodes (barcodes, wlean, wlc*), Logical (loggates, milstd), > * timing, MusiXTeX, Chess/CChess, Go, Backgammon, Dingbats/NiceFrame. etc. > > Any font type can be used for any output device/format. > This feature is supported by automatic font conversion > between font formats when needed. > This feature enables the rendering of Type 1 fonts *without ATM*. > On the other hand, it enables the use of TrueType/OpenType fonts > for generating PostScript printed even on PostScript Level 1 printers. > > In advance, BaKoMa TeX is ready to use most of free Type 1 fonts > available on CTAN and Trutype fonts coming with MS Windows systems. > > Font Setup Wizard lets you to install most of commercial (and free) > OpenType, TrueType, and Postscript Type 1 fonts in almost one click. > > OpenType/Type1 fonts (OTF) are supported also under Windows 9x and NT 4.0 > even without ATM. > > USER INTERFACE > > * Dynamical Preview (Instant Preview) of selected part of a document. > It reformats (and preview) selected part of document on the fly, > when you edit it. This feature accelerates tuning paragraphs, > mathematics, pictures, etc. > * Flexible window docking lets you optimize splitting your screen > for using Dynamical Preview efficiently. > * One touch key for TeX + Preview + other customizable postprocessors, > * Quick navigation via document structure, > * DVI Forward/Reverse search (format independent), > * Powerful support for different input encodings, > * Project support, > * Graphics import assistant, > * Assitance for multi-file documents: > context sensitive openning of included text and graphics files, > * Searching for TeX errors using the TeX log file, > * Searching for help for TeX commands in entire document collection, > * Syntax highlighting is configurable for catcodes and command dictionaries, > * Customizable GUI Bars and menus for inserting Math Symbols and other commands, > * Automatic creation of a BB-file for non-PostScript graphics. > * Spell Checker: On-the-spot highlighting of misspelled words, > correction proposals, handling accents and babel shortcuts. > configurable for handling (La)TeX commands. > * BibEdit - editor for LaTeX BIB files is included. > * Syntax Completion is context sensitive and flexible. > * Support for Multi-User systems. > > OUTPUT DEVICES/FORMATS > > * View on Windows Display. > * Print on any printer supported by a MS Windows driver. > * PostScript (really scalable), > * PDF, > * HTML. > > Important feature of BaKoMa TeX is consistent graphics and font support > for all types of output. This means that all font formats mentioned > may be used for every type of output. This also means that all graphical > capabilities mentioned are supported for every type of output. > > PDF GENERATION FEATURES > > * Handling in-line PostScript in DVI files (PSTricks). > * Creating PDF files which share fonts. > Suitable for preparing CD-ROM based document libraries. > * Embedding fonts in CFF requires 2--3 times less space then other font forms. > * Embedding ToUnicode CMAPs to support search and copy-paste > of cyrillic and other international characters. > * Handling HyperTeX (HyperRef) and document outline. > > HTML GENERATION FEATURES > > BaKoMa TeX 5 supports several ways for conversion of (La)TeX > documents into HTML files. > * `TeX|Generate HTML ...' text editor menu command lets you launch > `TeX4HT' convertor with numerous options. > * `File|Generate HTML ...' DVI viewer menu command lets you convert > pages of a DVI file into PNG files wrapped into navigation HTML > pages. This approach is useful for documents with complex graphics, > such as slides. > > In advance, BaKoMa TeX is ready to use `HEVEA' and/or `TTH' convertors. > Launching of these convertors is available via extra TABS of > `TeX|Generate HTML ...' editor command. > > Including graphics is well integreated with BaKoMa TeX graphical engine. > In this reason, you can insert everithing supported by BaKoMa TeX > into generated HTML pages. > > *** NEW FEATURES OF BAKOMA TEX 5.50 in comparison with BAKOMA TEX 5.40 *** > > BaKoMa TeX 5.50 introduces generation of SVG (Scalable Vector Graphics) > from your DVI files. Animation is supported. > > For more information see > <ftp://ftp.dante.de/tex-archive/systems/win32/bakoma/programs/changes5.html> > > ---------- End of BaKoMa TeX Information ----------

1 0

Re: CTAN upload notification: ps4pdf v0.6a
by Rainer Schöpf 06 Jun '03

06 Jun '03

> Name of contribution: ps4pdf v0.6a > Suggested location on CTAN: macros/latex/contrib/ps4pdf/ > Summary description: Using Postscript code in pdfLaTeX documents > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > Changes: > o trim parameter and draft option can be used > with the inactive option > o Size and alignment after trimming changed. > o Parameter hpos and vpos removed. > ---------------------------------------------------------------------- Thanks for the update, it was installed as requested. For the CTAN Team Rainer Schöpf

1 0

Re: CTAN upload: ttf2tex 0.6.1
by Rainer Schöpf 05 Jun '03

05 Jun '03

On Wed, 4 Jun 2003, Philipp Lehman wrote: > I've put a new release of ttf2tex into the incoming directory on > ftp.dante.de. This is a documentation update only. Please unpack > ttf2tex.tar.gz into support/ttf2tex, replacing the contents of this > directory. Thank you in advance. > > From the README: > > ttf2tex is a Bash script which generates all files required to use > Truetype fonts with Tetex from a set of .ttf files. In short, it will > do for Truetype fonts what fontinst's latinfamily command usually > does for Type 1 Postscript fonts. > > The script is designed for Unix systems running Tetex. It was > reported to work under several Linux flavors, FreeBSD, and MacOS X > with Fink. > > From the CHANGELOG: > > 2003-06-04 v0.6.1 > * documentation update only > * added FAQ to manual Thanks for the update, it was installed in support/ttf2tex For the CTAN Team Rainer Schöpf

1 0

CTAN submission -- pdfpages v0.2m
by Reinhard Zierke 04 Jun '03

04 Jun '03

----- Forwarded message from Andreas Matthias <amat(a)kabsi.at> ----- I have uploaded the archive file `pdfpages.tar.bz2' to ftp.dante.de/incoming. Please, extract this archive in /tex-archive/macros/latex/contrib/pdfpages/ (formerly .../contrib/supported/pdfpages/) The `pdfpages' package makes it easy to insert pages of external PDF documents. Several logical pages can be arranged onto each sheet of paper. The package provides hypertext operations like hyperlinks and article threads. New feature of the version: * support of PDF documents with mixed landscape/portrait pages * support of reverse page order: pages=7-3 * support of graphicspath * new option `picturecommand'; its argument is executed within a picture environment on each sheet of paper It is distributed under the LPPL. ----- End forwarded message ----- Thanks for the submission. I installed the new version as suggested in CTAN:macros/latex/contrib/pdfpages/ Reinhard Zierke for the CTAN team

1 0

CTAN submission: russian translation of lshort
by Reinhard Zierke 04 Jun '03

04 Jun '03

----- Forwarded message from Boris Tobotras ----- I'm uploading lshort-ru-4.12.tar to ftp.dante.de/incoming. This is update of my translation of lshort; please place it to /info/lshort/russian, replacing its contents. License is GPL, like original text. ----- End forwarded message ----- Thanks for the upload. This translation seems to be not so short anymore as the files have about doubled in size. Good work! Anyway, I installed it as suggested replacing the previous version in CTAN:info/lshort/russian/ Reinhard Zierke for the CTAN team

1 0

Re: Upload of urlbst-0.3
by Robin Fairbairns 04 Jun '03

04 Jun '03

Norman Gray writes: > + what you've uploaded > > urlbst-0.3.tar.gz > > + which CTAN node you've uploaded to > > ftp.tex.ac.uk/incoming > > + where you want the files to go > > /tex-archive/biblio/bibtex/contrib/urlbst/ replacing the files there now > > + what licensing conditions you apply to your software (see list > below). > > gpl > > + a brief summary of what your upload is intended to do. > > Adds functionality to urlbst, supporting eprint BibTeX field, and > adding --hypertex and --hyperref options. Documentation expanded, > explaining the difference between the goals of urlbst and those of > custom-bib. i've installed the package as requested (and i'll try and remember to get it in my faq for next time around). thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN upload notification: tpslifonts package v0.6
by Reinhard Zierke 02 Jun '03

02 Jun '03

----- Forwarded message from ctan-upload ----- A submission was uploaded to nova.dante.de:/ftp/incoming/upload-20030530.001/. The following information was provided by our fellow contributor: Name of contribution: tpslifonts package v0.6 Name and email: Stephan Lehmke <Stephan.Lehmke(a)udo.edu> Suggested location on CTAN: macros/latex/exptl/texpower/tpslifonts Summary description: A LaTeX package for configuring presentation fonts License type: GNU Project Announcement text: ---------------------------------------------------------------------- When I see a presentation which is a little demanding wrt fonts (especially when a lot of math is used), I'm usually disappointed by font readability. Most commercial `presentation tools' are completely out of the question because they don't have a clue about math formatting. But even when some LaTeX package is used, often the readability is not so good. cm math fonts at large design sizes are difficult to read from far away, especially at low resolutions and low contrast color choice. What is more, the LaTeX presentation packages do almost nothing for math readability. To name a few, combining cmr with cm math (seminar default), combining cmss with cm math (foils), or combining helvetica with cm math (prosper) doesn't help readability and sometimes leads to positively ugly results. It has to be said that real alternatives in the form of `presentation-friendly' math fonts freely available in PostScript Type1 format exist only since very recently. Thanks to Harald Harders for providing the hfbright collection and to Walter Schmidt for the cmbright fonts and for changing the license to make this possible. I hope that the ideas realised in the tpslifonts package lead to much better overall readability of some font combinations. The package tpslifonts offers a couple of `harmonising' combinations of text and math fonts from the (distant) relatives of computer modern fonts, with a couple of extras for optimising readability. The package offers the following features: 1) Text fonts from computer modern roman, computer modern sans serif, SliTeX computer modern sans serif, computer modern bright, or concrete roman. 2) Support for OT1 and T1 font encoding. 3) Math fonts from computer modern math, computer modern bright math, or Euler fonts. 4) Support of additional symbol fonts like AMS symbols or doublestroke. 5) All fonts configured for `smooth scaling' (like in the type1cm package). 6) Avoiding fonts not freely available in Type 1 format. 7) Careful design size selection for optimum readability. For some of the options to yield satisfying results, it is neccessary to install additional (free) Type1 fonts on your system. There's no intention to support other font families like the typical ``psnfss'' PostScript fonts, as they usually don't come in different design sizes, making the effort of tuning them for viewing futile. If you wish to use such a font, load it with the usual packages. tpslifonts is part of the TeXPower bundle, residing at http://texpower.sourceforge.net/ but is completely independent and can be used without texpower without problems. The example document slifontsexample.tex can also be compiled without TeXPower installed. A precompiled version of the example document (showing SliTeX computer modern sans serif text together with cmbright math) can be downloaded from http://texpower.sourceforge.net/doc/slifontsexample.pdf As I'm not really a font expert, I'm of course interested in opinions of the experts concerning the concepts behind tpslifonts and suggestions for improvement. regards Stephan Lehmke ---------------------------------------------------------------------- Thanks for the upload; I installed it as suggested in CTAN:macros/latex/exptl/texpower/tpslifonts/ Reinhard Zierke for the CTAN team

1 0

new CTAN package: smalltableof
by Jim Hefferon 01 Jun '03

01 Jun '03

A new package has been installed on tug.ctan.org and should make its way to a mirror near you in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ========================================================================== The following information was provided by our fellow contributor. Name of contribution: smalltableof Author's name: Boretti Mathieu Location on CTAN: macros/latex/contrib/smalltableof Summary description: Package to create listoffigures, ... as section instance of chapter License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This package allow creating list of figures, list of tables, ... that are section instance of chapter (You can make a chapter named List that contents section List of figure, section List of tables, ...) Ce package permet de gerer des tables/listes de figures/tables/... sous la forme de section et non pas de chapitre. - - ----------------------------------------------------------------------

1 0

New CTAN package: proba
by Jim Hefferon 01 Jun '03

01 Jun '03

A new package has been installed on tug.ctan.org and should have by now made its way to your favorite local mirror. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ====================================================================== The following information was provided by our fellow contributor. Name of contribution: proba Author's name: Laurent Nguyen-Ngoc Location on CTAN: macros/latex/contrib/misc Summary description: Some shortcuts commands to symbols used in probability texts License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This package includes some of the most often used commands in probability texts, e.g. probability, expectation, variance, etc. It also includes some short commands for set (blackboard) or filtrations (calligraphic) It requires Latex 2e and the amsfonts package - - ----------------------------------------------------------------------

1 0

CTAN upload notification: The TeXPower bundle, alpha release 0.0.9d
by Reinhard Zierke 27 May '03

27 May '03

----- Forwarded message from ctan-upload ----- The following information was provided by our fellow contributor: Name of contribution: The TeXPower bundle, alpha release 0.0.9d. Name and email: Stephan Lehmke Suggested location on CTAN: tex-archive/macros/latex/exptl/texpower Summary description: A bundle of LaTeX packages and classes for making pdf beamer presentations. License type: GNU Project Announcement text: ---------------------------------------------------------------------- (Sorry, the summary is not brief. You can delete everything below and including Among other packages below if neccessary.) TeXPower is a bundle of packages intended to provide an `all-inclusive' environment for designing pdf `screen presentations' to be viewed with Adobe Acrobat[tm] reader in full-screen mode, especially for projecting `online' with a video beamer. The features provided include: * `dynamic' features like incremental building of pages, animated diagrams and such. * support for `navigation panels' * support for page backgrounds * advanced color management (`logical markup' for colors supplying `color sets' for different background colors, `dimming' and inverting of colors etc.) and color highlighting. * advanced font configuration. TeXPower is not so much meant as a help for _designing_ slides (a lot more in this direction is planned for the future, but it is not the main purpose of the package); instead, you can keep your favourite slide or presentation class (say, seminar or pdfscreen or ...) and add dynamic effects with usepackage{texpower}. The bundle does contain a documentclass powersem which is derived from seminar by a very limited number of fixes and extensions trying to make it a little more suited for presentations (and more friendly towards pdftex). The bundle is developed by myself (Stephan Lehmke) and Hans Fr. Nordhaug who is also running the SourceForge site. The development is coordinated by a SourceForge Project. The homepage is http://texpower.sourceforge.net/. There you'll find the newest sources in a CVS repository, bug and patch trackers, a user forum and mailing list, and pdf files for all examples. Among other packages for dynamic effects (most notably PPower4 http://www-sp.iti.informatik.tu-darmstadt.de/software/ppower4/ and prosper http://prosper.sourceforge.net/), TeXPower is distinguished by INDEPENDENCE: There is no postprocessor, and also no dependence on the way in which pdf is produced. VERSATILITY: Everything is implemented entirely in LaTeX, hence you can use whatever LaTeX programming skills you have (and the numerous hooks provided) to design your own presentation effects. There are a lot of examples in the doc directory of this bundle, from very simple things (http://texpower.sourceforge.net/doc/simpledemo.pdf) to rather involved (and not completely serious :) examples of what can be done (http://texpower.sourceforge.net/doc/divexample.pdf, http://texpower.sourceforge.net/doc/panelexample.pdf, http://texpower.sourceforge.net/doc/fancystep.pdf). TeXPower contains a small number of simple and customizeable basic commands and a large number of derived commands for special purposes (for instance, dimming all colors on a page and then incrementally `undimming'). FRAGILITY (or maybe one should say BRITTLENESS): This is the backside of versatility I'm afraid. Unfortunately it is extremely easy to introduce errors and irritating spacing glitches (leading to parts of the page jumping and wobbling around during an incremental build). It is very helpful to have at least a basic understanding of the goings-on of LaTeX formatting for doing anything but the most basic things with TeXPower. While mostly the brittleness is inherent in the way texpower is implemented and can't be avoided at sustainable cost, it is our aim to reduce the impact by * `faultproof' customized environments like special list environments with automatical incremental display of items; * a large number of `ready-made' examples for most common uses; * an extensive FAQ list containing the most common blunders. Most of the above is unfinished in this alpha version. PRODUCTIVENESS: TeXPower tries to do a lot of things by itself, making it easier to design presentations. For instance, the stepwise command is similar to Prosper's overlays, but you don't have to count the steps yourself, stepwise will determine the number of steps quite reliably even if steps are nested inside of other steps etc. Furthermore, you _can_ say explicitly at which step something is to appear, but you don't have to; normally steps will just be executed in order. This makes it very easy to design and edit dynamic presentations. ROBUSTNESS: In spite of being alpha, the code is quite stable. In fact, no `real' bugs were found since november 2002. One note on the alpha status: TeXPower has been declared pre-alpha for several years, because I had promised myself to respect backwards-compatibility after alpha release and restrict distribution until this time. But then again, I had planned to get the alpha release out in 2000... As there are a lot of `faithful' users now, and as since GPLing TeXPower to put it on SourceForge, everybody is putting it in Linux distributions and such anyway, there is not much point in not declaring it alpha and putting it on CTAN also... This means the vow for backward-compatibility has to be renewed for the beta release... The alpha status is justified by the following problem areas: DOCUMENTATION: Part of the documentation, especially some of the examples and the FAQ, are still the same as for the much inferior version 0.0.8, partly invalidating them. Furthermore, the manual has been criticised for terseness and lack of examples. Currently, it is written for people who know quite a bit about LaTeX, complemented by the numerous demos showing usage of things. The documentation needs a lot of enhancement. CATCODE MONGERY: Currently stepwise takes everything to be displayed incrementally as a macro argument in the most naive way, destroying everything which needs to change catcodes, like language changes or verbatim printing. There are ways to remedy this, but all of them are complicated and/or awkward, so this need a bit of thought and might lead to backwards- incompatible changes of the basic commands for incremental display. BACKGROUNDS and PANELS: The support for page backgrounds and panels is preliminary at the moment. There will be a much more involved version which might not be completely backward compatibile. LABELS and LINKS: The basic idea for incremental display in TeXPower is to execute everything several times. This can lead to a lot of grief with duplicated links and labels. The most basic precautions are taken, so there shouldn't be any real problems in using links, but there will be a lot of warnings, and I didn't test yet what happens with bibliography and index. THUMBNAILS: No concept yet. PRESENTATION DESIGN: As mentioned above, TeXPower is not mainly design-oriented (and I myself don't really think a presentation gets better by fancy design), but there seems to be a definite need for this kind of thing. It is planned to add more `designish' document classes and provide a user interface for designing presentations. PDF GIMMICKS: With a little trickery with pdf forms, JavaScript and such, amazing things can be achieved which can be useful for presentations (most useful for me would be `popup boxes'). So far, no special pdf features (apart from what can be achieved in a generic way with hyperref) are supported. ---------------------------------------------------------------------- ----- End forwarded message ----- Thank you very much for the upload. I installed it as suggested in CTAN:macros/latex/exptl/texpower/ Reinhard Zierke for the CTAN team

1 0

Re: CTAN submision --- combine class and support packages
by Robin Fairbairns 23 May '03

23 May '03

Peter Wilson writes: > Dear CTAN/Robin, > > I have uploaded combine.tar to UK incoming. Please use this to > replace the current macros/latex/contrib/combine. The distribution > is under the LPPL. > > From the README: > > The combine class lets you bundle individual documens into a > single document, such as when preparing conference proceedings. > > The axiliary combinet package puts the authors and titles from > maketitle commands into the main document's ToC, and the combnat > package enables the combine class and natbib package to be used > harmoniously together. > > Changes in combnat package version 0.21 (2003/05/22) > o Removed extraneous space from year citation i've installed the files as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

New CTAN package: tokenizer
by Jim Hefferon 23 May '03

23 May '03

A new package has been installed at tug.ctan.org and should make its way, via the miracle of automatic mirroring, to your favorite local mirror. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ==================================================================== The following information was provided by our fellow contributor. Name of contribution: tokenizer Author's name: Sascha Herpers Location on CTAN: macros/latex/contrib/tokenizer Summary description: Package for tokenizing comma separated lists of strings. License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This package provides a rather small command, which splits a comma separated list of strings into two tokens at the first encounter of a comma. Each token is saved to a arbitrarily named command. - - ----------------------------------------------------------------------

1 0

Re: labels.sty bugfix release
by Robin Fairbairns 22 May '03

22 May '03

Julian Gilbey writes: > + what you've uploaded > > labels.tar.gz > > + which CTAN node you've uploaded to > > ftp.tex.ac.uk > > + where you want the files to go > > replace the old ones in macros/latex/contrib/supported/labels/ > > + what licensing conditions you apply to your software (see list > below). > > lppl > > + a brief summary of what your upload is intended to do. > > bugfix release so that the package works correctly with the color > package. thanks for the upload; i've actually installed it in macros/latex/contrib/labels, and deleted the old directory in contrib/supported. (ctan is losing the increasingly silly distinction between supported and other...) Robin Fairbairns For the CTAN team

1 0

Re: update to cmap package
by Robin Fairbairns 22 May '03

22 May '03

Vladimir Volovich writes: > i've uploaded the file cmap.sty to ftp.tex.ac.uk/incoming/ > > Please replace the file CTAN:macros/latex/contrib/cmap/cmap.sty with > this new file. > > It fixes a typo due to which the package had no effect at all :) that's good. i've installed the file as requested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: CTAN Upload: srhyphc.zip
by Robin Fairbairns 21 May '03

21 May '03

Aleksandar Jelenak writes: > FILE UPLOADED: srhyphc.zip > UPLOADED ON: ftp.tex.ac.uk/incoming > FILE CONTENTS: One file -- `srhyphc.tex' > CTAN DESTINATION: tex-archive/languages/hyphenation > FILE LICENSE: GPL -- GNU General Public License > SUMMARY: The file `srhyphc.tex' provides hyphenation patterns > for Serbian language in Cyrillic alphabet and T2A TeX > font encoding. i have installed the file as requested. thanks for the upload. robin

1 0

New CTAN package: eCards
by Jim Hefferon 20 May '03

20 May '03

A new package has been installed at tug.ctan.org and should make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ================================================================== The following information was provided by our fellow contributor. Name of contribution: eCards Author's name: D. P. Story Location on CTAN: macros/latex/contrib/eCards Summary description: Create electronic flash cards and have them viewed in random order License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- The eCards package for LaTeX enables you to create a series of electronic (flash) cards. The document author provides questions, hints and answers to a series of questions. Question can be verbal-response, or multiple choice/fill-in. Users can test their knowledge by responding to the questions. The questions are delivered in random order. - - ----------------------------------------------------------------------

1 0

New CTAN package: thrmappendix
by Jim Hefferon 20 May '03

20 May '03

A new package has been installed on tug.ctan.org. It will make its way to your local mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ================================================================= The following information was provided by our fellow contributor. Name of contribution: thrmappendix Author's name: Ben Klemens Location on CTAN: macros/latex/contrib/misc Summary description: A macro package to facilitate moving proofs to an appendix. License type: gpl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- Long proofs break the flow of a paper, and should be moved to an appendix. However, this often means the reader has to flip back and forth between the statement of the theorem in the text and the proof in the appendix. This macro solves the problem by letting you write the theorem in the body, and repeat it verbatim just before the proof in the appendix. The abbreviated format for writing up theorems, lemmas, &c. may be useful even if you don't have any proofs in your paper. - - ----------------------------------------------------------------------

1 0

CTAN upload notification: ps4pdf v0.5
by Reinhard Zierke 19 May '03

19 May '03

----- Forwarded message from ctan-upload ----- The following information was provided by our fellow contributor: Name of contribution: ps4pdf v0.5 Name and email: Rolf Niepraschk Suggested location on CTAN: CTAN: macros/latex/contrib/ps4pdf/ Summary description: Using Postscript code in pdf documents License type: LaTeX Project Announcement text: ---------------------------------------------------------------------- Changes: o trim option: Scaling was wrong, corrected. o New options draft/final. o Improved test file. Please remove the all files from macros/latex/contrib/ps4pdf/ and unpack the archive `ps4pdf-030518.zip' to the same location. Thanks in advance, ...Rolf ---------------------------------------------------------------------- ----- End forwarded message ----- Thanks for the upload. I installed it as suggested replacing the old version in CTAN:macros/latex/contrib/ps4pdf/ Reinhard Zierke for the CTAN team

1 0

Re: CTAN upload notification: pst-3dplot
by Robin Fairbairns 18 May '03

18 May '03

from cambridge upload daemon: > The following information was provided by our fellow contributor: > > Name of contribution: pst-3dplot > Name and email: Herbert Voss > Suggested location on CTAN: CTAN: /graphics/pstricks/contrib/pst-3dplot/ > Summary description: Plotting 3D objects, functions and data > License type: LaTeX Project > > Announcement text: > ---------------------------------------------------------------------- > New macro for placing objects, especially text, in one > of the three planes (xy, xz or yz). > > please replace all files in the directory > ---------------------------------------------------------------------- i've installed the files as suggested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: bgreek package upload
by Robin Fairbairns 16 May '03

16 May '03

J.-L. Rivera writes: > bgreek > ====== > > This package implements a dialect of the Beta Code encoding (TLG and Perseus > Project) for typesetting classical Greek using Claudio Beccari's Greek Fonts. > > The package is distributed under the LaTeX Project Public License. i have installed the bundle (readme.txt and a .zip file) on ctan at language/greek/bgreek thank you for the submission. Robin Fairbairns For the CTAN team

1 0

new CTAN package: pst-uml
by Jim Hefferon 14 May '03

14 May '03

A new package has been installed on tug.ctan.org and should find its way to your mirror in a day or two. Thanks for the material, Jim Hefferon ftpmaint(a)tug.ctan.org ====================================================================== The following information was provided by our fellow contributor. Name of contribution: pst-uml Author's names: Maurice DIAMANTINI, Herbert Voss Location on CTAN: graphics/pstricks/contrib/pst-uml Summary description: pst-uml is a pstricks based package for uml diagrams License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- pst-uml allows drawing of uml diagrams (Unified Modeling Langage) and is based on pstricks. - - ----------------------------------------------------------------------

1 0

new CTAN package: pst-vue3d
by Jim Hefferon 14 May '03

14 May '03

A new package has been installed on tug.ctan.org and should make its way to your favorite local mirror in a day or two. Thanks for the material, Jim Hefferon ftpmaint(a)tug.ctan.org ============================================================= The following information was provided by our fellow contributor. Name of contribution: pst-vue3d Author's names: Manuel Luque, Herbert Voss Location on CTAN: graphics/pstricks/contrib/pst-vue3d Summary description: pst-vue3d allows perspective views of three dimensional objects License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- With pst-vue3d three dimensional objects like cubes, spheres and others can be viewed from different points. The documentation is in french but the examples are self explanatory. - - ----------------------------------------------------------------------

1 0

CTAN upload notification: Highlight code converter
by Reinhard Zierke 14 May '03

14 May '03

----- Forwarded message from ctan-upload ----- The following information was provided by our fellow contributor: Name of contribution: Highlight code converter Name and email: André Simon Suggested location on CTAN: web Summary description: Command line tool to convert source code to highlighted TeX and LaTeX. License type: GNU Project Announcement text: ---------------------------------------------------------------------- Highlight is a universal sourcecode converter for Linux and Windows, which transforms code to LaTeX or TeX - files with syntax highlighting. Source code may be reindented and reformatted ---------------------------------------------------------------------- ----- End forwarded message ----- Thanks for the upload. I installed it (together with the README file extracted from the archive) in CTAN:support/highlight/ The web directory you suggested is for Donald Knuth's Web System of Structured Information, not the World Wide Web which came some years later. Reinhard Zierke for the CTAN team

1 0

CTAN upload notification: ps4pdf
by Reinhard Zierke 14 May '03

14 May '03

----- Forwarded message from ctan-upload ----- The following information was provided by our fellow contributor: Name of contribution: ps4pdf Name and email: Rolf Niepraschk Suggested location on CTAN: macros/latex/contrib/ps4pdf/ Summary description: Using Postscript code in pdf documents License type: LaTeX Project Announcement text: ---------------------------------------------------------------------- The new version provides the optional parameter trim for the macro `PSforPDF' similar to `includegraphics' from the package `graphicx'. Please remove the all files from macros/latex/contrib/ps4pdf/ and unpack the archive `ps4pdf.zip' to the same location. Thanks in advance, ...Rolf ---------------------------------------------------------------------- ----- End forwarded message ----- Thanks for the upload; I installed the new version as suggested in CTAN:macros/latex/contrib/ps4pdf/ Reinhard Zierke for the CTAN team

1 0

UK English FAQ v3.6
by Robin Fairbairns 13 May '03

13 May '03

i have just installed revised versions of the faq that i maintain on ctan (help/uk-tex-faq), on the web (http://www.tex.ac.uk/faq) and for distributors in the usual place. this version is much delayed for various technical reasons: i was close to giving up on it until this lunch-time, when (seemingly) à propos of nothing, the build suddenly started working again. this issue claims to answer 300 questions: the first edition, in december 1994, had 100. because of the delay, my backlog of pending answers is now up to 21 (though some of those are long-term development items), and my list of unresolved requirements has well over 100 entries. other desiderata include: -- a better search engine -- a less demanding means of generating html from the sources -- various technicalities about cross-referencing within the faq suggestions, or offers of help, for the search engine would be very welcome indeed. Robin Fairbairns UK TeX FAQ (and CTAN) maintainer

1 0

CTAN Upload - BaKoMa TeX 5.40, Omega with Dynamical Preview
by Reinhard Zierke 12 May '03

12 May '03

----- Forwarded message from Basil K. Malyshev ----- I have uploaded to `ftp.dante.de/incoming/bakoma' directory update for BaKoMa TeX 5.40 (issued 9-May-2003). Please put the files to 'CTAN:nonfree/systems/win32/bakoma' directory. New features are: 1) Updated TeX for version 3.141592. 2) Updated Omega for version 1.23.5 based on TeX 3.141592. Included support for Dynamical Preview; DVI Search marks generation; Automatical generation of BB-files for imported graphics. 3) Support for TrueType fonts (Type42) embedded into imported Postscript. 4) FlateDecode filter. 5) Import of Enhanced Metafiles (EMF). 6) Refined handling of Omega Unicoded fonts (OFM/OVF). Bye. Basil K. Malyshev 12-May-2003 PS: Please send announce to appropriate mailing lists and news groups. --------------- About BaKoMa TeX 5.40 ---------------------- CONTENTS * Highlights * Graphical Capabilities * Fonts * User Interface * PDF Generation Features * HTML Generation features * New Features of BaKoMa TeX 5.40 For more information about BaKoMa TeX see <ftp://ftp.tex.ac.uk/tex-archive/nonfree/systems/win32/bakoma/index.html> BaKoMa TeX is a complete TeX system for Microsoft Windows XP/2000/NT/98/95 HIGHLIGHTS * BaKoMa TeX is PostScript enabled TeX system. * Dynamical Preview allows the user to preview instantly selected region of the file being edited. (like to Instant Preview - http://www.activetex.org). ** Generates *PDF* from documents with *PSTricks*, *PSfrag*, etc. ** Generates HTML (TeX4HT, DVI2HTML), also supports Hevea and TTH. * Supports using PostScript Type 1 fonts (including MM) *WITHOUT ATM*. However, using ATM for font rendering is optionally available. * Complete distribution includes about *1500* TeX Fonts (including EC/TC, LH) in ATM Compatible PostScript Type 1 font format. * Font Setup Wizard installs OpenType/TrueType/Postscript fonts in one click * Consistent graphics and font support for all DVI back-ends. * BibEdit - editor for LaTeX BIB files is included. * Supports hyperlink text broken across lines and pages. * Easy to install and use. * Much less expensive than other analogues. GRAPHICAL CAPABILITIES BaKoMa TeX includes an interpreter for *PostScript Level 2*, which is tested for compatibility with output from popular software such as: MetaPost, Adobe Illustrator 10, Adobe Streamline 4.0, Mathematica 4, MatLab, CorelDraw 10, CorelXARA, HIGZ, PageDraw, FrameMaker, ImageMagick, etc. All DVI back-ends support the same special interface compatible with well known Rokicki's DVIPS, including processing PostScript embedded into DVI files (PSTricks, PSfrag, XyPic, etc.). The system includes Graphics Import Filters for the following formats: PostScript, HPGL, DXY, JPEG, PNG, GIF, TIFF, PCX, MSP, BMP. FONTS BaKoMa TeX supports the following font formats: * OpenType (both TTF and OTF are supported), * PostScript Type 1 (including Multiple Masters), * PostScript Type 3, * TrueType, * TeX PK/VF. The system includes about *1500* typefaces in PostScript Type 1 and Type 3 font format including the following fonts: * CM (including LaTeX and Logo fonts + vf for T1 with CX * AMS Fonts (Euler, Math Symbols), * EC/TC, * LH (T2A), * Concrete (Math, ECC), * Malvern, * CMCyr + vf for T2A/LCY * Scripting fonts, CMPica, Punk. Math Fonts: * Stmaryrd, Wasy, Rsfs, YHMath, BlackBoard (bbm, doublestroke). Diagram drawing fonts: * Lams, Astro Symbols (cmastro, astrosym, moonphase), * Barcodes (barcodes, wlean, wlc*), Logical (loggates, milstd), * timing, MusiXTeX, Chess/CChess, Go, Backgammon, Dingbats/NiceFrame. etc. Any font type can be used for any output device/format. This feature is supported by automatic font conversion between font formats when needed. This feature enables the rendering of Type 1 fonts *without ATM*. On the other hand, it enables the use of TrueType/OpenType fonts for generating PostScript printed even on PostScript Level 1 printers. In advance, BaKoMa TeX is ready to use most of free Type 1 fonts available on CTAN and Trutype fonts coming with MS Windows systems. Font Setup Wizard lets you to install most of commercial (and free) OpenType, TrueType, and Postscript Type 1 fonts in almost one click. OpenType/Type1 fonts (OTF) are supported also under Windows 9x and NT 4.0 even without ATM. USER INTERFACE * Dynamical Preview (Instant Preview) of selected part of a document. It reformats (and preview) selected part of document on the fly, when you edit it. This feature accelerates tuning paragraphs, mathematics, pictures, etc. * Flexible window docking lets you optimize splitting your screen for using Dynamical Preview efficiently. * One touch key for TeX + Preview + other customizable postprocessors, * Quick navigation via document structure, * DVI Forward/Reverse search (format independent), * Powerful support for different input encodings, * Project support, * Graphics import assistant, * Assitance for multi-file documents: context sensitive openning of included text and graphics files, * Searching for TeX errors using the TeX log file, * Searching for help for TeX commands in entire document collection, * Syntax highlighting is configurable for catcodes and command dictionaries, * Customizable GUI Bars and menus for inserting Math Symbols and other commands, * Automatic creation of a BB-file for non-PostScript graphics. * Spell Checker: On-the-spot highlighting of misspelled words, correction proposals, handling accents and babel shortcuts. configurable for handling (La)TeX commands. * BibEdit - editor for LaTeX BIB files is included. * Syntax Completion is context sensitive and flexible. * Support for Multi-User systems. OUTPUT DEVICES/FORMATS * View on Windows Display. * Print on any printer supported by a MS Windows driver. * PostScript (really scalable), * PDF, * HTML. Important feature of BaKoMa TeX is consistent graphics and font support for all types of output. This means that all font formats mentioned may be used for every type of output. This also means that all graphical capabilities mentioned are supported for every type of output. PDF GENERATION FEATURES * Handling in-line PostScript in DVI files (PSTricks). * Creating PDF files which share fonts. Suitable for preparing CD-ROM based document libraries. * Embedding fonts in CFF requires 2--3 times less space then other font forms. * Embedding ToUnicode CMAPs to support search and copy-paste of cyrillic and other international characters. * Handling HyperTeX (HyperRef) and document outline. HTML GENERATION FEATURES BaKoMa TeX 5 supports several ways for conversion of (La)TeX documents into HTML files. * `TeX|Generate HTML ...' text editor menu command lets you launch `TeX4HT' convertor with numerous options. * `File|Generate HTML ...' DVI viewer menu command lets you convert pages of a DVI file into PNG files wrapped into navigation HTML pages. This approach is useful for documents with complex graphics, such as slides. In advance, BaKoMa TeX is ready to use `HEVEA' and/or `TTH' convertors. Launching of these convertors is available via extra TABS of `TeX|Generate HTML ...' editor command. Including graphics is well integreated with BaKoMa TeX graphical engine. In this reason, you can insert everithing supported by BaKoMa TeX into generated HTML pages. *** NEW FEATURES OF BAKOMA TEX 5.40 in comparison with BAKOMA TEX 5.35 *** 1) Updated TeX and Omega a) Updated TeX for version 3.141592. b) Updated Omega for version 1.23.5 based on TeX 3.141592. This implementation (in comparison with previous one) supports: + Dynamical Preview; + DVI Search marks generation; + Automatical generation of BB-files for imported graphics; In other words, Omega supports all features as TeX and e-TeX, except of TCX, because it has own transliteration feature. 2) Graphics Added support for: 1) TrueType fonts (Type42) embedded into imported Postscript graphics (Postscript Level 3 feature). 2) FlateDecode filter (Postscript Level 3 feature). 3) Import of Enhanced Metafiles (EMF). Geometry is calculated automatically. In this reason, to import EMF just `includegraphics{foo.emf}' is enough. 4) Refined handling of Omega Unicoded fonts (OFM/OVF). For more information about changes see <ftp://ftp.dante.de/tex-archive/nonfree/systems/win32/bakoma/programs/changes5.html> ---------- End of BaKoMa TeX Information ---------- Thanks for the upload. I installed the new files as suggested. Reinhard Zierke for the CTAN team

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

ctan-ann