ctan-ann

ctan-ann@ctan.org

4 participants
21245 discussions

Re: Prosper update
by Reinhard Zierke 21 Mar '03

21 Mar '03

On Fri, Mar 21, 2003 at 02:20:58PM +0100, Mathieu Goutelle wrote: > I have uploaded a brand new version of the prosper class, to update the > quite old (and a little buggy) one on CTAN. This update is done with > full permission from the developer of Prosper (Frederic Gouarlard), > whose spare time doesn't allow to do this himself. > > Here are the informations about the upload: > > + what you've uploaded > > /incoming/prosper.tar.gz > > > + which CTAN node you've uploaded to > > dante.ctan.org > > > + where you want the files to go > > macros/latex/contrib/supported/prosper (unchanged) > > > + what licensing conditions you apply to your software (see list > > below). > > LPPL (LaTeX Project Public License) > > > + a brief summary of what your upload is intended to do. > > (please note that the mail should be in english for speedy processing) > > This is an update of the prosper class (slides using LaTeX), written by > Frédéric Goualard. There is a lot of changes and bugs fixes since the > last version committed to CTAN (see ChangeLog file for further details). Thanks for the update. I installed it as suggested replacing the old version in CTAN:macros/latex/contrib/supported/prosper Reinhard Zierke for the CTAN team

1 0

CTAN submission -- minitoc update
by Reinhard Zierke 19 Mar '03

19 Mar '03

----- Forwarded message from Jean-Pierre Drucbert ----- I have uploaded a new release of the minitoc package (release #38) in /incoming of ftp.dante.de under the name minitoc.tar.gz The minitoc package allows to create mini-tables of contents (and mini-LOFs/LOTs) by chapter (in books and reports), by section (in arcticles) or by parts. The licence is LPPL as before. The location is as before: tex-archive/macros/latex/contrib/supported/minitoc The new release replaces all files in that directory. As the version number jumps from 34 to 38, there are a lot of corrections, improvements (and perhaps bugs?) in the new release. See below the historic of changes. I am very grateful to all people who helped me by pointing bugs, asking for new features, giving hints and solutions, or for useful packages (placeins from Donald Arseneau). Could you install this package to replace the current release #34. Thanks a lot. Best regards, Jean-Pierre F. Drucbert (who is ashamed to have left so much time pass away since the preceeding update) % 03Jan2001 Version 35 % 09Jan2001 Added macros to test if a file is ``empty'' % (i.e. empty, blank or inexistent) or ``non % empty'' (i.e. useful). % I used some code from Stephan von Bechtolsheim. % Added the checkfiles/nocheckfiles options. % Replaced The@chapter by The@mtc. % 26Feb2001 Added bulgarian.mld, hebrew.mld, % icelandic.mld, latin.mld, samin.mld. % 09Mar2001 Added mtcselectlanguage. % 01Jun2001 Fixed estionian option (missing). % 04Jul2001 Added interlingua language. % % 11Feb2002 Version 36 % 11Feb2002 Corrected an interaction with ableofcontents % which creates a chapter* or a section*, % perturbing mtc/stc counters (problem signalled % by Frank Mittelbach). % 18Feb2002 Corrected a spacing problem with empty titles % (problem signalled by Frank Mittelbach). % Workaround for the parttoc-chapter* % problem. % 19Feb2002 Added mtcskip and mtcskipamount. % 27Feb2002 Fixed test for empty files. % 13Mar2002 Added bangla language. % 15Mar2002 Reduced depth of mtc@strutbox. % % xxxxxxxxx Version 37 canceled % % 24Jan2003 Version 38 % 24Jan2003 pt -> p@ and 0pt -> z@ % 24Jan2003 hrule and vrule replaced by ule (latex) % 24Jan2003 added mtc@zrule for zero-dims rules % 28Jan2003 added frenchb language (synonym of french) % 30Jan2003 changed test for empty titles % 30Jan2003 added options flsection and flsectionb % 31Jan2003 option tight applies to parttoc % (Thomas Leonhardt leonhardt(a)informatik.tu-darmstadt.de) % 07Feb2003 options flsection and flsectionb removed, % 07Feb2003 replaced by insection option (=flsectionb). % 11Feb2003 corrected numbering of SLF, SLT % 20Feb2003 added frenchle and frenchpro languages (synonym of french) % 20Feb2003 corrected secttocs, at least. % 18Mar2003 corrected some vertical spacings and struts % (I added some mods by Frank Mittelbach, many % thanks to him.) % A lot of cleaning remains to do, but the % release seems to be needed now. % Jean-Pierre F. Drucbert % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ----- End forwarded message ----- Thanks for the upload. I installed it as suggested replacing the old version in CTAN:macros/latex/contrib/supported/minitoc/ Reinhard Zierke for the CTAN team

1 0

CTAN package upgrade: sffms
by Jim Hefferon 18 Mar '03

18 Mar '03

A package has been upgraded on tug.ctan.org and the new version should make its way through the mirroring process in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ===================================================================== The following information was provided by our fellow contributor. Name of contribution: sffms Author's name: M. C. DeMarco Location on CTAN: macros/latex/contrib/supported/sffms/ Summary description: A LaTeX class for typesetting fiction manuscripts License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- Sffms, a LaTeX class for typesetting science fiction and fantasy manuscripts, has been updated to version 2.0. Sffms now includes several options for specific publishers as well as extensive documentation aimed at new LaTeX users. The code has been cleaned up for version 2.0 and the geometry package made optional. - - ----------------------------------------------------------------------

1 0

New CTAN package: dvipng
by Jim Hefferon 17 Mar '03

17 Mar '03

A new packge has been installed on tug.ctan.org and it should make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ======================================================================== The following information was provided by our fellow contributor. Name of contribution: dvipng Author's name: Jan-Åke Larsson Location on CTAN: dviware/dvipng Summary description: A fast DVI to PNG converter License type: gpl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This program makes PNG graphics from DVI files as obtained from TeX and its relatives. Its benefits include * Speed. It is the fastest bitmap-rendering code for DVI files known to the author. On a fairly low-end laptop, it takes less than a second to generate 150 one-formula images. * It does not read the postamble, so it can be started before TeX finishes. There is a -follow switch that makes dvipng wait at EOF for further output, unless it finds the POST marker that indicates the end of the DVI. * It supports PK and VF fonts, color specials, and more. The motivation for this project is preview-latex, a previewing tool for LaTeX in emacs, but since dvipng can be independently useful, a separate package is provided. - - ----------------------------------------------------------------------

1 0

Re: [Omega] Omega stuff for Hindi
by Robin Fairbairns 17 Mar '03

17 Mar '03

Yannis Haralambous writes: > Omega stuff for Hindi has been submitted to CTAN: > > >-- mail the administrators (ctan(a)dante.de) to report: > > + what you've uploaded > > omega-hindi.tgz > > > + which CTAN node you've uploaded to > > ftp.tex.ac.uk > > > + where you want the files to go > > language/devanagari/omega > > > + what licensing conditions you apply to your software (see list > > below). > > free (same status as Omega distribution) > > > + a brief summary of what your upload is intended to do. > > (please note that the mail should be in english for speedy processing) > > These are the files described in our TUGboat paper at TUG India. With > them you can typeset Devanagari texts with omega. More info in Low-level > Devanagari Support for Omega--Adapting devnag, TUGboat, Volume 23 (2002), > No. 3--Proceedings of the 2002 Annual Meeting, pp. 49--55. i've installed the files as requested (at cambridge). they'll take some time to get to the other two ctan nodes, but will probably be at every ctan mirror within a small number of days. Robin Fairbairns For the CTAN team

1 0

Re: CTAN Sumbission -- cmap package: create searchable PDF files
by Robin Fairbairns 16 Mar '03

16 Mar '03

Vladimir Volovich writes: > I've uploaded the file cmap.tar.gz into the incoming directory of > ftp.tex.ac.uk. It is a new (version 1.0a) cmap package. > The license is LPPL. > > The cmap package is to be used with pdf(e)latex and provides CMap > files for various LaTeX font encodings (currently, T1, T2A, T2B, T2C, > T5; this list will grow in the future) and a latex package which adds > the /ToUnicode entries into the font dictionaries of fonts used in the > document on the fly, making the resulting PDF files searchable and > cut-and-pasteable in Acrobat Reader and other PDF previewers. > > Thus, when the document uses Type 1 fonts like cm-super or other fonts > in standard font encodings, teh PDF files will contain the additional > information in the form of CMap entries which will define the mappings > from LaTeX font encodings to Unicode, making functions like search in > PDF and cut-and-paste from PDF to other applications work properly. > > Please install it in the CTAN:macros/latex/contrib/supported/cmap > directory. > > Contributions and/or requests for other font encodings support, as > well as user feedback/bug reports are welcome. > > P.S. currently, this package is mirrored to > macros/latex/contrib/supported/t2/etc/cmap; i think that a more > generic location in macros/latex/contrib/supported/cmap is better, > since the package is of general use. i'll remove it from the T2 > package once it will be installed on > macros/latex/contrib/supported/cmap i've installed the package as requested: thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Re: excludeonly
by Robin Fairbairns 15 Mar '03

15 Mar '03

Donald Arseneau writes: > I have just uploaded excludeonly.sty to ctan/uk. > > What: excludeonly.sty and excludeonly.xml > Why: Provides excludeonly which is the opposite to includeonly > How: PD > Who: Donald Arseneau and Dan Luecking > Where: macros/latex/contrib/other/misc installed: as reqested. xml-file: going off to catalogue maintainer thanks: yeah. responder: rf for: ctan team

1 0

new CTAN package: RST
by Jim Hefferon 14 Mar '03

14 Mar '03

A new package has been installed at tug.ctan.org. It shoud make its way to your favorite mirror in the next day or two. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ===================================================================== The following information was provided by our fellow contributor. Name of contribution: RST Author's name: David Reitter Location on CTAN: nonfree/macros/latex/contrib/supported/rst Summary description: Drawing rhetorical structure analysis diagrams in LaTeX License type: nocommercial Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This package is of interest for people working in linguistics and language technology. Drawing rhetorical analyses is no fun when you need to change and update diagrams as you refine your work, or, more importantly, if a lot of analyses are to be drawn. Voila, there we go: This package enables us to typeset beautiful diagrams with no hassle. It is oriented towards the style of the diagrams shown in Mann&Thompson's Rhetorical Structure Theory and subsequent works. This package works perfectly with (LaTeX) and pdfLaTeX and does not require any special postscript capabilities in the output side. - - ----------------------------------------------------------------------

1 0

Re: CTAN submission --- tocbibind package
by Robin Fairbairns 13 Mar '03

13 Mar '03

Peter Wilson writes: > I have uploaded tocbibind.tar to UK incoming. Please use this to > replace the contents of > macros/latex/contrib/supported/tocbibind. The distribtion is under > the LPPL. > > From the README: > > The tocbibind package can be used to add the ToC and/or > Bibliography and/or Index, etc., to the Table of Contents listing. > > Changes in version 1.5g (2003/03/13) > o Fixed Bibliography page headings in twocolumn book class i've install the files as requested. thanks for the upload. From: Robin Fairbairns <ctan(a)dante.de>

1 0

CTAN submission: updated font metrics for Lucida Bright and LuxiMono
by Reinhard Zierke 13 Mar '03

13 Mar '03

Walter Schmidt asked us to update two packages: -------------------------------------------------------------------------- I have uploaded the file lucida-20030312.zip to the /incoming directory at dante.ctan.org. Please, unpack it to the CTAN directory fonts/metrics/bh/lucida thus replacing the current files and adding some new ones. These are updated fonts metrics and VFs for Y&Y's commercial LucidaBright fonts. Recent improvements to the fontinst tool and changes to the TeXBase1 encoding made it possible to fix some long-standing deficiencies: * all typewriter fonts have got vertically centered asterisks now; * all textcompanion fonts have got vertically centered extaskeriskcented symbols now; * the Omega symbol extohm is made available in all textcompanion fonts. See the file readme.lucida for further minor changes, which affect the layout of the distribution. I am fully aware, that these font metrics were updated only recently. Thus, it may seem as if an important piece of software has become unstable as soon as I started touching it ;-) However, I think that the Lucida font metrics should profit as soon as possible from the above-mentioned improvements. Note that the character widths are unchanged, as compared with the previous release, so there should be no compatibility problems. -------------------------------------------------------------------------- I have uploaded the files README.luximono and ul9.zip to the /incoming directory at dante.ctan.org. Please, move them to the directory fonts/LuxiMono thus replacing the current ones. These are updated fonts metrics and VFs for the LuxiMono typewriter fonts. Recent improvements to the fontinst tool made it possible to fix a long-standing deficiency of many typewriter fonts (incl. Luxi): the asterisk symbols are now vertically centered, as required for typical applications. The Type1 font files on CTAN remain, of course, unchanged. -------------------------------------------------------------------------- I installed the new and changed files as suggested in the directories CTAN:/fonts/metrics/bh/lucida/ and CTAN:fonts/LuxiMono/. Reinhard Zierke for the CTAN team

1 0

patch of yesterday's release of uk faq
by Robin Fairbairns 12 Mar '03

12 Mar '03

i've installed v3.5.1 of the faq on ctan and on http://www.tex.ac.uk/faq this version mends a significant number of stupid typos that tim love (of c.u.engineering dept) spotted and told me about yesterday afternoon. my apologies for the rapid re-issue. distributors' version building as i type. Robin Fairbairns UK TeX FAQ maintainer http://www.tex.ac.uk/cgi-bin/texfaq2html?label=maillists+askquestion

1 0

CTAN submission -- altepakete.pdf (obsolete but often used old stuff)
by Reinhard Zierke 11 Mar '03

11 Mar '03

----- Forwarded message from Mark Trettin ----- I have uploaded `altepakete.tar.gz' to ftp.dante.de/incoming/ Name of contribution: Das LaTeX-Sündenregister (sins of LaTeX users) Suggested location on CTAN: info/german/altepakete/ Summary description: Obsolete commands, packages and other common mistakes License type: Free Announcement text: ---------------------------------------------------------------------- A small list of obsoleted commands and packages that are constantly posted in minimal examples to de.comp.text.tex. I further listed common mistakes (e.g. egin{appendix}...end{appendix} instead of appendix ...). This file should be considered an add-on to the available documentation like l2kurz and FAQs. This document is written in German. ---------------------------------------------------------------------- ----- End forwarded message ----- Thank you very much for your informative documentation. I installed it as suggested in CTAN:info/german/altepakete/ Reinhard Zierke for the CTAN team

1 0

CTAN submission -- initials fonts
by Reinhard Zierke 11 Mar '03

11 Mar '03

----- Forwarded message from Maurizio Loreti ----- + what you've uploaded incoming/initials.tar.gz + which CTAN node you've uploaded to ftp.dante.de + where you want the files to go tex-archive/fonts/initials/ + what licensing conditions you apply to your software non-commercial (for the fonts; the macros are public domain) + a brief summary of what your upload is intended to do From the README file: --------------------------------------------------------------------------- This archive contains PostScript binary files for a few decorative initials (also called dropped initials) fonts, and the service files needed in order to use these fonts with [La]TeX. The fonts are freely usable for non-commercial use, and are a (small) subset of the ones designed and crafted by: Dieter Steffmann Marburger Straße 93a D-57223 Kreuztal (Germany) and available under his Web page http://www.steffmann.de/english/index.htm (follow the link to Fonts). That URL states: You may download [the fonts] for free and use them for personal purposes.; my own files (all but the .pfb and .afm from the following list) are public domain. The files included in the distribution are: .pfb files: PostScript Font Binary files; .afm files: Adobe Font Metric files; .tfm files: TeX Font Metric files, for LaTeX; .fd files: Font Description files, for LaTeX; config files: configuration files, for dvips; .map files: font mapping files, for dvips; .tex files: example files; .pdf files: Portable Document Format output from the above example files. --------------------------------------------------------------------------- ----- End forwarded message ----- Thank you very much for the upload. I installed the package in the directory CTAN:/tex-archive/nonfree/fonts/initials/ with a symbolic link from tex-archive/fonts/initials/ Reinhard Zierke for the CTAN team

1 0

new release of uk tex faq (v3.5)
by Robin Fairbairns 11 Mar '03

11 Mar '03

i've installed a new version of the uk tex faq, on ctan (help/uk-tex-faq), on the www.tex.ac.uk/faq web page, and for distributors on the private address they will already know. this new version has a few more questions answered, a number of updates and corrections of old answers, but textually there's been little change. the web appearance has changed slightly, but the big difference is that there is now a seach via google link (which specialises the search you request so that it only looks at the faq: Hans Nordhaug found this facility for me). i would welcome users' views on this addition: the existence of the google facility obviously saves me the trouble of writing a proper search mechanism (which has long been delayed on my list of things-to-do), but if users dislike the google arrangement, it won't continue. as always, i welcome comments about, or suggestions or (best of all) actual text, for the faq. submissions should be sent to faq(a)tex.ac.uk Robin Fairbairns UK TeX FAQ maintainer http://www.tex.ac.uk/cgi-bin/texfaq2html?label=maillists+askquestion

1 0

new sansmath on ctan
by Robin Fairbairns 09 Mar '03

09 Mar '03

donald arseneau has submitted a new package sansmath.sty (pd licence), and i've installed it in macros/latex/contrib/other/misc the package defines a new math version 'sans', and a command sansmath that behaves somewhat like oldmath. detailed documentation is to be found in the package file itself. as always, thanks, donald. Robin Fairbairns For the CTAN team

1 0

New CTAN material: latexcount
by Jim Hefferon 08 Mar '03

08 Mar '03

A new package has been installed at the tug.ctan.org node of CTAN and should make its way to your favorite mirror soon. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ============================================================== The following information was provided by our fellow contributor. Name of contribution: latexcount Author's name: P.D. Magnus Location on CTAN: support/misc Summary description: Perl script generates word count of LaTeX documents License type: lppl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- The latexcount script gives a reasonably accurate count of the number of words in the main text of an article, the number of words in footnotes, and the number of words total. The list of tags that don't get counted can be added to as needed. - - ----------------------------------------------------------------------

1 0

CTAN upgrade: WinTeX 2000
by Jim Hefferon 06 Mar '03

06 Mar '03

A package has been upgraded at tug.ctan.org. I should make its way to a mirror near you quite soon. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ========================================================================= Name of contribution: WinTeX 2000 Author's name: Michael Muecke Location on CTAN: systems/win32/wintex2000 Summary description: WinTeX 2000 is a 32bit Windows TeX editor with a modern MDI-Interface and the MS Office look and feel. WinTeX 2000 offers powerful editing functions in a comfortable and easy to use environment. License type: shareware Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- WinTeX 2000 is a Windows TeX editor with a modern MDI-Interface and the MS Office look and feel. WinTeX 2000 offers powerful editing functions in a comfortable and easy to use environment. Key features: * MS Office look & feel * VBScript enabled application * Syntax highlighting * Auto spell automatically underlines misspelled words in your text * Thesaurus finds synonyms * Super fast editing of large files * Sophisticated BiBTeX editor - - ----------------------------------------------------------------------

1 0

CTAN submissions -- cmtiup and cmslup
by Reinhard Zierke 06 Mar '03

06 Mar '03

----- Forwarded message from Sergei V. Znamenskii ----- + what you've uploaded cmtiupsr.zip archive (27.04k) contains just the cmtiup.dtx file with all sources; cmtiup.zip archive (57.86k) contains all files packed for tds-compliant distribution; cmtiupem.zip archive (25.35k) packed for use with emTeX without sources and virtual fonts. cmtiup.txt (1.16k) contains brief plain text annotation; cmtiup.pdf (133.15k) contains short version of user documentation in PDF format; cmtiup.tpm (1.95k) serves the fpTeX installation routine. + which CTAN node you've uploaded to ftp.dante.de + where you want the files to go CTAN/fonts/cm/cmtiup (replace old files, please) + what licensing conditions you apply to your software LPPL + a brief summary of what your upload is intended to The new version of cmtiup package contains the following modification of cmti* fonts, named cmtiup*: (1) all Punctuation chars turns Uprighted (no slant), (2) corresponded italic corrections added as kerning; Replacement of cmti* fonts fy cmtiup* simplifies typesetting of articles where otherwise author or editor have to use additional tex commands to upright punctuation in italic text with formulas. No changes made in fonts; fatal bug in cmtiup.sty fixed (thanks to Shingo SAITO <new(a)ms.u-tokyo.ac.jp>) and documentation improved. License: LPPL (LaTeX Project Public License) Contents: - METAFONT sources, - corresponding tfm files, - virtual font set to use type1 cm fonts, - latex2e style file to switch from cmti* to cmtiup*. -------------------------------------------------------------------- + what you've uploaded cmslupsr.zip archive (17.76k) contains just the cmslup.dtx file with all the sources; cmslup.zip archive (40.74k) contains all files packed for tds-compliant distribution; cmslupem.zip archive (27.03k) packed for use with emTeX without sources and virtual fonts. cmslup.txt (1.16k) contains brief plain text annotation; cmslup.pdf (128.55k) contains short version of user documentation in PDF format; cmslup.tpm (1.73k) can serve the fpTeX installation routine. + which CTAN node you've uploaded to ftp.dante.de + where you want the files to go CTAN/fonts/cm/cmslup/ + what licensing conditions you apply to your software LPPL + a brief summary of what your upload is intended to The cmslup package contains the following modification of cmsl* fonts, named cmtiup*: (1) all Punctuation chars turns Uprighted (no slant), (2) corresponded italic corrections added as kerning; Replacement of cmsl* fonts fy cmslup* simplifies typesetting of articles where otherwise author or editor have to use additional tex commands to upright punctuation in slanted text with formulas and add appropriate kerns which may differ from italic correction. License: LPPL (LaTeX Project Public License) Contents: - METAFONT sources, - corresponding tfm files, - virtual font set to use type1 cm* fonts, - latex2e style file to switch from cmsl* to cmslup*. ----- End forwarded message ----- Thanks for the upload. I installed both packages as suggested in the directories CTAN:fonts/cm/cmtiup/ and CTAN:fonts/cm/cmslup/ Reinhard Zierke for the CTAN team

1 0

CTAN submission: EPM TeX Front End 4.0 (OS/2)
by Reinhard Zierke 01 Mar '03

01 Mar '03

----- Forwarded message from Walter Schmidt ----- I have uploaded the file epmtfe.zip to the /incoming directory at dante.ctan.org. Please, delete all files and subdirectories from the CTAN directory systems/os2/epmtfe and unpack the uploaded ZIP file to this directory then. (Please, do not unpack the enclosed archives.) This is version 4.0 of the EPM TeX Front End, a module for the OS/2 Enhanced Editor EPM. It turns the EPM into an integrated TeX environment, providing (La)TeXing, previewing and executing of auxiliary programs from the editor menu. Remarkable features are: * (La)TeX errors are highlighted in the document source; * Postscript support (dvips conversion on-the-fly); * optional TeXing of a marked region of a file; * support for split source file; * OS/2 shell and WPS interface; * optional LaTeX syntax assist; * additional user-definable menu items; * works also in conjunction with VTeX/2; * stable, reliable, and esay to use. Two flavors of the TeX Front End are provided: * classic: for use with any TeX system, including emTeX and VTeX/2 * VTeX: for use with VTeX/2 _only_, making the use of this system particularly convenient Each variant is available with English or German user interface. Changes over version 3 are listed in the file NEWS. Main items are: * fully interactive configuration (except for the user-defined menu items); * thorough clean up of menus, window titles and error messages; * menu item to control VTeX's path cache; * improved log file parsing facility, making use of VTeX's particular log file format; ----- End forwarded message ----- Thanks for the upload. I installed it as suggested replacing the old version in CTAN:systems/os2/epmtfe Reinhard Zierke for the CTAN team

1 0

wrapfig.sty moved, extra documentation
by Robin Fairbairns 28 Feb '03

28 Feb '03

i suggested to donald arseneau that i should move wrapfig.sty to a directory of its own, and add to it a copy of his recipe for multiple- column inserts using wrapfig; he agreeed, and supplied a copy of his latest version of the recipe. i have now made the change: the new directory is macros/latex/contrib/supported/wrapfig the new directory will propagate to the other servers in due course. Robin Fairbairns For the CTAN team

1 0

CTAN upload: LaTeX Font Sampler
by Jim Hefferon 27 Feb '03

27 Feb '03

A new package has been installed on tug.ctan.org and should make its way to your favorite mirror soon. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org =================================================================== The following information was provided by our fellow contributor. Name of contribution: LaTeX Font Sampler Author's name: Peter Flynn Location on CTAN: info/fontsampler Summary description: Samples of free typefaces available with LaTeX License type: gpl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- This is an update of the sampler which has previously been available on our Web site. It has been extended to include a few more faces, and this version comes with the complete source code. The fonts themselves you have to install from the CTAN. Contributions of code are welcomed to enable us to include the omitted fonts. License: GNU GPL. - - ----------------------------------------------------------------------

1 0

ctan upload: sam2p
by Jim Hefferon 27 Feb '03

27 Feb '03

A new package has been installed on tug.ctan.org. It will make its way to your favorite mirror shortly. Thanks for the upload, Jim Hefferon ftpmaint(a)tug.ctan.org ================================================================= The following information was provided by our fellow contributor. Name of contribution: sam2p Author's name: Szabó Péter Location on CTAN: graphics/sam2p Summary description: A sophisticated raster image-converter to PostScript and PDF License type: gpl Announcement text given by the contribution's author: - - ---------------------------------------------------------------------- sam2p is a UNIX command line utility written in ANSI C++ that converts many raster (bitmap) image formats into Adobe PostScript or PDF files and several other formats. The images are not vectorized. sam2p gives full control to the user to specify standards-compliance, compression, and bit depths. In some cases sam2p can compress an image 100 times smaller than the PostScript output of many other common image converters. sam2p provides ZIP, RLE and LZW (de)compression filters even on Level1 devices. - - ----------------------------------------------------------------------

1 0

Re: bbcard10.zip
by Robin Fairbairns 26 Feb '03

26 Feb '03

Patrick TJ McPhee writes: > I've uploaded bbcard10.zip to cam.ctan.org. The files it contains are > either public domain or under a bsd-style licence. > > I suggest installing under graphics/metapost/contrib/macros/bbcard. > > The files are metapost examples which are useful in their own right > and may provide value as models. > > bbcard.mp -- a bullshit bingo playing card > breakwidth.mp -- a macro which breaks text into paragraphs without > using an external formatter > calendar.mp -- a monthly calendar, which can generate a year's > worth of calendars in one step > scorecard.mp -- a baseball score card i've installed the files as you suggest. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN submission -- numprint.sty
by Reinhard Zierke 25 Feb '03

25 Feb '03

----- Forwarded message from Harald Harders ----- I have uploaded the file numprint.tar.gz to ftp.dante.de. Please replace the files in CTAN://macros/latex/contrib/supported/numprint by its contents. >From the README: Print numbers with a separator every three digits and convert numbers given as 123e456 to 123cdot 10^{456}. If an optional argument is given it is printed upright as unit. Change log: - 0.20 2003/02/24 Added support for pm sign, Fixed bug which made units fragile. - 0.10 2003/01/08 Changed several command from <commandname> to p<commandname> because of an incompatibility with the french language of babel. This makes numprint.sty incompatible with older versions in some cases. License is LPPL. ----- End forwarded message ----- Thanks for submitting the new version. I installed it as suggested replacing the old version in CTAN://macros/latex/contrib/supported/numprint/ Reinhard Zierke for the CTAN team

1 0

Re: CTAN upload notification: DCpic
by Robin Fairbairns 24 Feb '03

24 Feb '03

our upload daemon tells me: > The following information was provided by our fellow contributor: > > Name of contribution: DCpic > Name and email: Pedro Quaresma <xxx> > Suggested location on CTAN: tex-archive/macros/generic/diagrams/dcpic > Summary description: Commutative diagrams and Graphs in a (La)TeX or > ConTeXt document > License type: GNU Project > > Announcement text: > ---------------------------------------------------------------------- > DCpic is a package of TeX macros for graph modelling in a (La)TeX or > ConTeXt document. Its distinguishing features are: the use of PiCTeX > a powerful graphical engine, and a simple specification syntax. the new (v4.0) version of the package has now been installed as suggested. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

ctan-ann