ctan-ann

ctan-ann@ctan.org

4 participants
20854 discussions

Re: CTAN submission: PSNFSS 9.2 bug fix
by Rainer Schöpf 18 Oct '04

18 Oct '04

On Mon, 18 Oct 2004, Walter Schmidt submitted a fix to PSNFSS. He wrote: > I have uploaded the files > > changes.txt > freenfss.zip > > to the /incoming directory at dante.ctan.org. > Please, substitute them for the corresponding files in the > CTAN directory > > macros/latex/required/psnfss > > This is a fix to PSNFSS 9.2, correcting a major bug in the > metrics and VFs of the Charter fonts. Credits to > Ingo Lepper for pointing me to the problem! Thanks for the update, I installed it. For the CTAN Team Rainer Schöpf

1 0

Re: Announcement: GELLMU version 0.8.0.5 -- bug fixes and minor changes
by Robin Fairbairns 16 Oct '04

16 Oct '04

William F. Hammond writes: > Version 0.8.0.5, a bug fix release to replace version 0.8 (and an > earlier bug fix release), is now available at CTAN in support/gellmu. > > The bugs addressed all involve the gellmu project's article > document type and its output streams for XHTML+MathML and PDF > (via LaTeX). > > There had been a serious bug in XHTML+MathML output that could > intertwine subscripts in the content of sum (or int or prod) with > the use of a subscript attached to the sum command itself for range. > Also the handling of ot in XHTML+MathML output had been simply > wrong. > > An annoying (and regressive) small bug in LaTeX output had caused > verbatim->verblist to be double spaced. > > There is now an environmental variable for turning off use of UMSS > (which is on by default) and the default location for UMSS materials > (and mxh.css) is now simply ../webstyle (which can be changed > using an environmental variable). > > For other fixes and changes see > > http://www.tex.ac.uk/tex-archive/support/gellmu/README > > There have been requests for better documentation and, in particular, > a command glossary. > > The user's guide has been expanded somewhat, but it is still far from > finished. > > A command glossary is now high on my to-do list. For it to be as > reliable as possible it will be implemented as one of the output > streams from a literate document type definition. That will take > some time. > > Please continue to report any bugs you find. > > -- Bill Forwarded by Robin Fairbairns For the CTAN team

1 0

CTAN has a new package: eskd
by Jim Hefferon 16 Oct '04

16 Oct '04

A new package has been uploaded on tug.ctan.org, and should soon make its way to your favorite mirror. Thank you for the upload, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: eskd Author's name: Vjacheslav Fyodorov Location on CTAN: macros/latex/contrib/eskd Summary description: Class for making text documents in accordance with russian (and probably post-USSR) standards for designers License type: lppl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- eskd.cls class designed for making text documents in accordance with russian (and probably post-USSR) standards for designers. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/macros/latex/contrib/eskd although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors . _______________________________________________ Ctan mailing list Ctan(a)dante.de https://sun.dante.de/mailman/listinfo/ctan Diese E-Mail enthdlt vertrauliche und/oder rechtlich gesch|tzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrt|mlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

1 0

Re: cam.ctan.org upload: pstricks-add
by Robin Fairbairns 16 Oct '04

16 Oct '04

Herbert Voss writes: > Robin, I just uploaded pstricks-add.tgz into the > incoming directory. > > pstricks-add, version 2.18 (2004-10-16) > > pstricks-add collects a lot of the code which was posted > to the pstricks mailing list and has some more new features: > > pstricks-add: > > - pstricks > o braces as node connection/linestyle > o arrows, arrows, arrows, ... > > - pst-plot > o new environment psgraph > o new macro pstScalePoints > o new option for logarithmic axes > o new macro and options for ticklines > o new plot option bar and option barwidth > o new options step, start end for plotting data files > o new options xLabel, yLabel > o new option plotNo for multiple data files x y1 y2 y3 ... > o new macro psplotPolynomial[coeff=<0 a1 a2 ...>]{<xStart>}{<xEnd>} > > - pst-node > o bugfixes > o new macro nclineII for a two-colored line > o new option lineAngle for ncdiag > o new macros for interpolation nodes > and linear combination of two vectors > o new macro ncbarr (line with 5 segments) > > > pst-eqdf.pro: the prolog file for pstricks-add > pstricks-add-doc.ltx: the main doc file > pstricks-add-doc.tex: the included doc file i've installed the files as required, and despatched them to other mirrors. thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN has a new package: QCM
by Jim Hefferon 14 Oct '04

14 Oct '04

A new package has been installed on tug.ctan.org and I expect that it has already arrived at your favorite mirror. Thanks for the upload, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: QCM Author's name: Didier Verna Location on CTAN: macros/latex/contrib/qcm Summary description: A LaTeX2e class for making multiple choices questionnaires License type: lppl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- This is the first public release of QCM. This package provides you with a document class for making multiple choices questionnaires (QCM is the corresponding French acronym) under LaTeXe. A special environment allows you to define questions and possible answers that you can specify as correct or wrong. QCM not only formats the questions for you, but also generates a form (a grid that your students will have to fill in), and a mask (the same grid, already filled in properly). You can then print the mask on a slide and correct the questionnaires more easily by superimposing the mask on top of students' forms. QCM also comes with support for AUC-TeX. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/macros/latex/contrib/qcm although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN submission: updated minitoc package
by Reinhard Zierke 14 Oct '04

14 Oct '04

----- Forwarded message from Jean-Pierre Drucbert ----- I just uploaded a new version of the `minitoc' package in ftp://ftp.dante.de/incoming/minitoc.tar.gz package: minitoc version: 39 position on CTAN : tex-archive/macros/latex/contrib/minitoc/ (should replace the version 38) licence: LPPL updates versus version 38: ======================================================================= Version #39 Corrections in documentation modern font commands added @fileswfalse and mtc@hook@beforeinputfile for the notoccite package (asked for by Donald Arseneau) added notoccite option (loads the notoccite package) added language options and .mld files for dialects: canadian (=english) acadian, acadien, canadien (=french) naustrian, ngerman (=ngermanb) added comments in .mld files using special fonts. corrections in the documentation added a paragraph about making a TOC for appendices, not listed in the main TOC. added a PDF version of the english documentation (I used the txfonts to get a better rendering with PDF; the dangerous bend signs are still in a bit-map font, but it is not vital). TODO: compatibility with the memoir class TODO: omtcpagenumbers & memoir class ----- End forwarded message ----- Thanks for the upload; I installed as suggested replacing the old version in CTAN:macros/latex/contrib/minitoc/ Reinhard Zierke for the CTAN team

1 0

CTAN upload notification: CorrIdx
by Reinhard Zierke 14 Oct '04

14 Oct '04

----- Forwarded message from ctan-upload ----- Name of contribution: CorrIdx Name and email: Johannes Karl Fink <fink(a)unileoben.ac.at> Suggested location on CTAN: indexing Summary description: A preprocessor for MakeIndex to sort chemical names in an index License type: lppl Announcement text: ---------------------------------------------------------------------- The CorrIdx program can be used to sort an index with chemical names containing leading numbers, etc. into a proper alphabetical order. It is intended as a preprocessor for the MakeIndex program. ---------------------------------------------------------------------- Thanks for the upload. I installed it in CTAN:indexing/corridx next to the makeindex directory. Note: The program is written in Pascal. A Windows binary and Pascal code are provided. Reinhard Zierke for the CTAN team

1 0

CTAN package update: PerlTeX
by Jim Hefferon 13 Oct '04

13 Oct '04

A package has been updated on tug.ctan.org and should already have arrived at your favorite mirror. Thank you for the update, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: PerlTeX Author's name: Scott Pakin Location on CTAN: macros/latex/contrib/perltex Summary description: Define LaTeX macros in terms of Perl code License type: lppl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- PerlTeX is a combination Perl script (perltex.pl) and LaTeX2e style file (perltex.sty) that, together, give the user the ability to define LaTeX macros in terms of Perl code. Once defined, a Perl macro becomes indistinguishable from any other LaTeX macro. PerlTeX thereby combines LaTeX's typesetting power with Perl's programmability. The following changes have been made from the previous version of PerlTeX: * perlmacros.sty has been renamed to perltex.sty. * PerlTeX macros can now return LaTeX code which in turn invokes other PerlTeX macros. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/macros/latex/contrib/perltex although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN upload notification: psethiop
by Reinhard Zierke 13 Oct '04

13 Oct '04

----- Forwarded message from ----- Name of contribution: psethiop Name and email: Malte Rosenau <mrosena(a)gwdg.de> Suggested location on CTAN: fonts/psethiop Summary description: Type1 fonts for ethiop.sty License type: gpl Announcement text: ---------------------------------------------------------------------- This is a set of Type1 fonts for ethiop.sty, a LaTeX package for typesetting Ethiopian languages. The 44 Postscript fonts included in this collection were created from the original Metafont sources with mftrace. Despite the fact that potrace does an amazing job, the quality of the individual glyphs is by no means as good as in the original bitmap version, so please do NOT use them for printing purposes. They look pretty much ok in pdf files. ---------------------------------------------------------------------- ----- End forwarded message ----- Thanks for the upload. I installed the fonts in CTAN:fonts/ps-type1/ethiop/ and created a link from CTAN:language/ethiopia/psethiop/ to fonts/ps-type1/ethiop/ (CTAN:language/ethiopia/ethiop/ is the place of the original font) Reinhard Zierke for the CTAN team

1 0

CTAN has a new package: ANUfinalexam
by Jim Hefferon 12 Oct '04

12 Oct '04

A new package has been installed on tug.ctan.org. It should soon make its way to your favorite mirror. Thank you for the contribution, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: ANUfinalexam Author's name: Timothy Kam Author's email: timothy.kam(a)anu.edu.au Location on CTAN: macros/latex/contrib/anufinalexam Summary description: LaTeX document shell for ANU final exam License type: nocommercial Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- This LaTeX document shell is created for the standard formatting of final exams in The Australian National University. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/macros/latex/contrib/anufinalexam although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN submission -- Beamer version 3.00, pgf version 0.64
by Reinhard Zierke 11 Oct '04

11 Oct '04

----- Forwarded message from Till Tantau ----- I have put new versions of beamer and pgf on ftp.dante.de:/incoming. Announcement: This is version 3.00 of beamer, a class for creating presentations using latex. To use it, you also need - pgf version >=0.63, - xcolor version >=2.00 To install the class follow the instructions in doc/beameruserguide.pdf. This is a major update of beamer, containing many changes, most having to do with a new theme management. Old presentations should still compile without errors, but some slight color and spacing changes may occur, however. The update from pgf 0.63 to 0.64 is just a minor bugfix and not needed to use the new beamer version. Here are the changelogs: Beamer version 3.00: Themes: - Completely new theme management. - Lot's of new variations of themes. - Font/element/layout/color themes are orthogonal and can be freely combined. - Old themes obsolete, but supported for compatibility. - Original default theme is now in beamerthemecompatibility.sty. New default is more minimalistic. + Presentation themes: - There are now 24 ready-to-use presentation themes. - Manuel Carro has send me a theme that I slightly adapted and added as the Madrid theme. + Layout and element Themes: - There are 9 different layouts themes, including three new ones that were not available in the previous version. - There are 4 different element themes (which dictate things like how items are typeset). + Color themes: - There are 10 color themes, including a yellow-on-blue theme. - The seahorse and rose theme allow you to change the colors of headlines and footlines easily to much less aggressive versions. - You can now dictate the color of every minute detail of a presentation individually, (including math!). + Font themes: - 6 font themes. Change the fonts of titles to, say, small caps just by using the smallcaps theme; no need to meddle with templates. - Just like colors, you can individually change all fonts in minute detail without touching any templates. Documentation: - Split documentation into multiple files. - Reorganized and reworked large parts of the documention. - Added a small tutorial to help new users. - Extracted all guidelines and recommendations and put them in a guidelines section. Also added lots of guidelines on fonts. - Added an index (though it's pretty poor, still). Solutions: - Added a solutions directory. It contains ready-to-use solutions for common problems (like a template for a conference talk). - Help appreciated (see the documentation). Added: - Added frame environment (finally!). - Added the dot notation to overlay specifications. If a dot is used instead of a plus, the beamerpauses counter is not incremented. - Added xmpmulti.sty. Very useful for including Multi Metapost graphics. - Added some functionality to onslide to get it more in sync with ha-prosper. - Made eamerdefaultoverlayspecification work also outside frames. - Added new version of beamer.el by Thomas Baumann. - footnote now takes an overlay specification. - Added beamercolorbox environment. - Characters like : may now be active (nice for french style). Only exceptions are < and >. - Added a note on how to use msc.sty with beamer. - TOCs in sidebar will now do line breaking (finally!). - Powerful object-oriented new font management. - Powerful object-oriented new color management. - ableofcontents now has more options for showing/not showing entries. - Same is true for the toc in sidebars. - Added keywords command (like subject). - Added a patch to make beamer work together with musixtex. pause will be redeclared inside music environments. - Added insert's for inserting the start and end pages of the current frame, subsection, section, part, presentation, appendix. Changed: - Reordered directories. - beamerboxesrounded now works differently. color schemes no longer needed. - Option class=xxxx onsolete. Use document class xxxx directly instead and load new style beamerarticle. - Cleaned up lot's of internals. - Slight changes to vertical spacing. - slidestop is now called t and slidescentered is called c. - eamersetleftmargin and eamersetrightmargin obsolete. Use setbeamersize instead. - Old themes are now mapped to new internal mechanisms. Slight color and vertical spacing changes may occur. Bugfixes: - Fixed incompatibility with czech.sty. - Fixed some spacing problems with label. - Fixed bug that could cause endless loop if more than two pages resulted from an allowframebreaks. - Fixed bug that caused incorrect counter resets in conjunction with allowframebreaks. - Fixed bug that caused footnotes of suppressed frames to spill over to the next frame. - Fixed bug with AtBeginSection + lecture + mode* - Fixed label bug in article mode in conjunction with amstex - Fixed spacing problems when pause is used in equations - Fixed spacing problem with slides that start with an itemize. - Fixed color problem in itemize in conjunction with evil use of everymath. - Fixed failure of action environment in handout and trans modes. - Fixed bug with shrink + t options. - Fixed lot's of other small things. - Fixed problem with displayed math formulas are message improper halign... - Fixed wrong positioning of mini frames on notes pages. - Fixed bugs in outer theme miniframes. - Fixed foreground coloring problem in beamerboxesrounded. - Fixed alert in article mode problem. - Fixed emporal problem. - Fixed vertical mode after item problem. - Applied patch with typo fixed submitted by Ohura Makoto. - Fixed warnings concerning it/sl substitution for cmss. - Renamed ternary to tertiary and fourth to quaternary. - Changed parent of color frametitle to titlelike. - Fixed problem with ote in lectures that are excluded. pgf version 0.64: - Fixed missing depth of pgfnodebox. - Fixed bug that caused infinite stack loop with pictures inside nodes. ----- End forwarded message ----- Thanks for the uploads. I installed them as suggested replacing the old versions in CTAN:graphics/pgf/ and CTAN:macros/latex/contrib/beamer/ Reinhard Zierke for the CTAN team

1 0

Re: CTAN upload notification: fancyhdr.sty
by Rainer Schöpf 11 Oct '04

11 Oct '04

Piet van Oostrum submitted the new version 3.1 of his fancyhdr package. It contains a small patch to solve a problem with verbatiminput and includegraphics. fancyhdr is a package for extensive control of page headers and footers in LaTeX. It is installed on CTAN in macros/latex/contrib/fancyhdr License type: lppl Thanks for the update. For the CTAN Team Rainer Schöpf

1 0

CTAN package update: LaTeXPiX
by Jim Hefferon 07 Oct '04

07 Oct '04

A package has been updated on tug.ctan.org and should make its way to your favorite mirror soon. Thanks, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: LaTeXPiX Author's name: Nick van Beurden Location on CTAN: systems/win32/latexpix Summary description: As Is License type: As is Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- The fourteenth CTAN release has the following improvements: * Added German translations by Lars Borchert. * Lowered unnecessary RGB to CMYK conversion precision for all colours. * Removed several bugs (thanks to Robert Rutten) in the text editor form and added information label here. * Hopefully fixed the looping automatic upgrading. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/systemx/win32/latexpix although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN package upgrade: microtype
by Jim Hefferon 07 Oct '04

07 Oct '04

A package has been upgraded on tug.ctan.org, and should already be at your favorite mirror. Thank you for the upload, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: microtype Author's name: R Schlicht Location on CTAN: macros/latex/contrib/microtype Summary description: An interface to the micro-typographic extensions of pdfTeX License type: lppl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- The `microtype' package provides a LaTeX interface to pdfTeX's micro-typographic extensions: character protrusion and font expansion. NEW: ===== * new font sets: `allmath' and `basicmath' enabling character protrusion in math mode * protrusion factors for Computer Modern Roman math symbols * more protrusion factors for Adobe Garamond and Computer Modern Roman in TS1 encoding CHANGES: ========= * if an alias font name is specified, it will be used as an alternative, not as a replacement * more tests for sanity of settings and whether all fonts will be set up * more robust parsing of sizes in font sets * more bug fixes - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/macros/latex/contrib/microtype although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN has a new package: bib2xhtml
by Jim Hefferon 06 Oct '04

06 Oct '04

A new package has been installed on tug.ctan.org and should make its way to your favorite mirror quite soon. Thanks for the upload, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: bib2xhtml Author's name: Diomidis Spinellis Location on CTAN: biblio/bibtex/utils/bib2xhtml Summary description: Convert BibTeX Files into XHTML License type: gpl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- bib2xhtml is a program that converts BibTeX files into HTML (specifically XHTML 1.0). The conversion is mostly done by specialized BibTeX style files, derived from a converted bibliography style template. This ensures that the original BibTeX styles are faithfully reproduced. Some postprocessing is performed by Perl code. This is an update of the bib2html program written by David Hull in 1996 and maintained by him until 1998. I have been a happy user of the program since 1995, using the program to keep my publication list up to date, and, lately, to generate the on-line bibliography list for my book Code Reading: The Open Source Perspective (Addison-Wesley 2003). After 1998 no other changes were made to the program, and I failed to locate an active program home page. Since there were a number of changes I needed to bring the program up to date with evolving web standards, I decided to adopt bib2html for maintenance, evolution, and further distribution. The first new public release made in 2004, features support for XHTML 1.0. Given that two projects on freshmeat.net claim the name bib2html, on March 2004, I decided to rename the project into bib2xhtml, to emphasize the result's XHTML conformance. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/biblio/bibtex/utils/bib2xhtml although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN submission -- xkeyval 1.6
by Reinhard Zierke 06 Oct '04

06 Oct '04

----- Forwarded message from Hendri Adriaens ----- I just uploaded xkeyval 1.6 to ftp.dante.de Please install it in the existing dir macros/generic/xkeyval The update is mainly inspired on a small bug that was present in version 1.5. Further, typos have been corrected and some small changes have been made in preventing loading parts of the package twice. ----- End forwarded message ----- Thanks for the upload. I installed it as suggested replacing the previous version in CTAN:macros/generic/xkeyval/ Reinhard Zierke for the CTAN team

1 0

CTAN submission -- Floatrow 0.1a
by Reinhard Zierke 05 Oct '04

05 Oct '04

----- Forwarded message from Olga Lapko ----- Name of contribution: floatrow package 0.1a Uploaded to: ftp.dante.de/incoming/floatrow Suggested location on CTAN: macros/latex/contrib/floatrow Summary description: Customising layouts for floating environments License type: lppl Abstract: ---------------------------------------------------------------------- The floatrow package provides many ways to customise layouts of floating environments; offers possibilities to put floats side by side, to put caption beside float. All floats of one type could appear in one layout This package co-operates with caption 3.0 package ---------------------------------------------------------------------- Changes: There was created floatsetup stuff, analogous to captionsetup in caption 3.0---the more flexible way to customising of float layouts. _______________________________________________ ----- End forwarded message ----- Thanks for the upload. I installed it as suggested replacing the previous version in CTAN:macros/latex/contrib/floatrow Reinhard Zierke for the CTAN team

1 0

ctan submission -- fixed font metrics for the Bera fonts
by Reinhard Zierke 05 Oct '04

05 Oct '04

----- Forwarded message from Walter Schmidt ----- I have uploaded the files README.bera bera.zip bera.pdf to the /incoming directory at dante.ctan.org. Please, move them to the CTAN directory fonts/bera thus replacing the existing files. These are corrected font metrics for the Bera font family. In detail, I have fixed a few bugs in the kerning tables of the BeraSans fonts, which resulted from a faulty installation script. A fixed font sample is provided. too. ------------------------------------------------- Thanks for the upload. I installed the updated files as suggested in CTAN:fonts/bera/ Reinhard Zierke for the CTAN team

1 0

Re: CTAN upload notification: mimeTeX version 1.50
by Robin Fairbairns 02 Oct '04

02 Oct '04

John Forkosh writes: > I've uploaded ftp.tex.ac.uk/incoming/mimetex.zip > containing mimetex version 1.50 > As per your README.uploads instructions... > > + what you've uploaded > mimetex.zip > (to replace support/mimetex/mimetex.zip) > + which CTAN node you've uploaded to > ftp.tex.ac.uk > + where you want the files to go > support/mimetex > (Please replace both existing files > mimetex.zip and README > in support/mimetex, i.e., > unzip mimetex.zip README > and then place this separate copy of README > alongside mimetex.zip in the support/mimetex > directory. Thanks.) > + what licensing conditions you apply to your software > GNU GPL > + brief summary of what your upload is intended to do. > Various new features and fixes since the last point > release, and updated documentation. > ---------------------------------------------------- > From the original submission... > MimeTeX, licensed under the gpl, lets you easily embed > LaTeX math in your html pages. It parses a LaTeX math > expression and immediately emits the corresponding gif > image, rather than the usual TeX dvi. > And mimeTeX is an entirely separate little program > that doesn't use TeX or its fonts in any way. It's just > one cgi that you put in your site's cgi-bin/ directory, > with no other dependencies. So mimeTeX is very easy to > install. And it's equally easy to use. Just place an > html <img> tag in your document wherever you want to see > the corresponding LaTeX expression. For example, > <img src=../cgi-bin/mimetex.cgi?f(x)=int_{-infty}^xe^{-t^2}dt > border=0 align=absmiddle> > generates and displays the corresponding gif image > on-the-fly, wherever you put that <img> tag. MimeTeX > doesn't need intermediate dvi-to-gif conversion, and it > doesn't clutter your filesystem with separate little gif > files for each converted expression. (Optional image > caching does store gif files, and subsequently reads them > as needed, rather than re-rendering the same images every > time a page is reloaded.) > See http://www.forkosh.com/mimetex.html > for examples illustrating mimeTeX's features and usage. i've installed the upload as requested -- thanks for it. Robin Fairbairns For the CTAN team

1 0

Re: CTAN submission --- pagenote package
by Robin Fairbairns 30 Sep '04

30 Sep '04

Peter Wilson writes: > I have uploaded pagenote.tar.gz to UK incoming. Please use this to > replace the current latex/contrib/pagenote. > > >From the README: > > The pagenote package provides tagged notes on a separate page (aka end > notes). > > Changes in v1.1 (2004/09/27) > o New hooks for babel > o Improved error handling thanks for the upload; i've installed the files in macros/latex/contrib/pagenote, as suggested. Robin Fairbairns For the CTAN team

1 0

Re: cam.ctan.org Upload: pst-light3d
by Robin Fairbairns 29 Sep '04

29 Sep '04

Herbert Voss wrote: > I am just uploading pst-light3d.tgz. Plaese install > all files in the new directory > > graphics/pstricks/contrib/pst-light3d/ > > `pst-light3d' is a PSTricks package for three dimensional > lighten effect on characters and PSTricks graphics, like > lines, curves, plots, ... (the package's author is in fact Denis Girou). i've installed the files as requested; thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN has a new package: bibfile-reformat-pages
by Jim Hefferon 28 Sep '04

28 Sep '04

A new package has been installed on tug.ctan.org and should soon make its way to your favorite mirror. Thanks for the material, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: bibfile-reformat-pages Author's name: Barak A. Pearlmutter Location on CTAN: biblio/bibtex/utils/bibfile-reformat-pages Summary description: puts .bib file page ranges into uniform format (abbreviated or not as requested) License type: gpl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- Small gawk script to put all the pages= page ranges in a .bib file into a uniform format, either 1234-1256 or upon request 1234-56; 12-12 always scrunched to just 1234; squeezes out spaces around separator; can make all separators one-dash or two-dashes upon request. Very very conservative: probably impossible for it to actually mess up a file. - - ---------------------------------------------------------------------- You can have a look at the package at http://tug.ctan.org/tex-archive/biblio/bibtex/utils/bibfile-reformat-pages although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors

1 0

CTAN upload -- xkeyval
by Reinhard Zierke 28 Sep '04

28 Sep '04

----- Forwarded message from Hendri Adriaens ----- I just uploaded version 1.5 of xkeyval to ftp.dante.de. Please install it in the existing directory: tex-archive/macros/generic/xkeyval/ Information on the update: 1) a preset system has been added 2) commands for defining boolean keys now available 3) a LaTeX patch has been added to avoid premature expansions of class and package options 4) pst-xkey, a specialization of xkeyval for PSTricks packages 5) some minor bug fixes ----- End forwarded message ----- Thanks for the upload, I installed the new version as suggested replacing the old version in CTAN:macros/generic/xkeyval Reinhard Zierke for the CTAN team

1 0

Re: CTAN submission --- titling package
by Robin Fairbairns 27 Sep '04

27 Sep '04

Peter Wilson writes: > I have uploaded titling.tar.gz to UK incoming. Please use this to > replace the current macros/latex/contrib/titling. The distribution is under > thec LPPL. > > >From the README: > The titling package provides controls over the typesetting of the > maketitle and hanks commands, makes the itle, author and date > information permanantly available, and allows multiple titles in a single > document. > > Changes in version 2.1c (2004/09/26) > o No technical change but deleted mention of an unimplemented macro. i've installed the files as requested; thanks for the upload. Robin Fairbairns For the CTAN team

1 0

CTAN packages update: ncclatex, ncctools
by Jim Hefferon 25 Sep '04

25 Sep '04

Two related packages have been updated on tug.ctan.org and should have already appeared at your favorite mirror. Thank you for the update, Jim Hefferon ====================================================================== The following information was provided by the package's contributor. Name of contribution: NCCLATEX bundle Author's name: Alexander I Rozhenko Location on CTAN: macros/latex/contrib/ncclatex, macros/latex/contrib/ncctools Summary description: Improved support for Cyrillic License type: lppl Announcement text given by the package's contributor: - - ---------------------------------------------------------------------- Using non-ASCII symbols in math mode is very limitted in LaTeX (e.g. cyrillic letters simply disappear when they typesetted in math mode). This leads to many errors in typesetting LaTeX papers, especially for papers converted from MS Word. The introduced light version of CP1251 input encoding, cp1251-light, allows using common cyrillic letters in label names and solves the problem of typesetting common cyrillic letters in math mode. - - ---------------------------------------------------------------------- You can have a look at the packages at http://tug.ctan.org/tex-archive/macros/latex/contrib/ncclatex and http://tug.ctan.org/tex-archive/macros/latex/contrib/ncctools although you may get a better network connection by visiting a mirror of CTAN that is near to you; see http://www.ctan.org/tex-archive/README.mirrors .

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

ctan-ann